A
-
Abrasion resistance
Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2016-2017, Pages 1331-1346]
-
Abrasion resistance
Making and investigating the effect of chemical pigments on the compressive, tensile, abrasion and water absorption resistance of colored concrete with an emphasis on urban beautification [Volume 10, Issue 40, 2021, Pages 3032-3047]
-
Abrasion Resistant
Preparation and investigation of mechanical properties of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of acrylic acid modified polybutadiene compatibilizer [Volume 8, Issue 30, 2019-2020, Pages 2187-2180]
-
Absorption
Investigation of the properties and applications of magnetic metal-organic framework (MMOF) composites for detection and removal of environmental pollutants [Volume 9, Issue 35, 2020, Pages 2546-2572]
-
Acenaphthene
A review on synthesis, properties and application of advanced naphthalimide dyes [Volume 1, Issue 2, 2012-2013, Pages 13-30]
-
Acetylation
Optimization of toughening of Polylactic Acid Nanocomposites/ Nanofibrillated Cellulose [Volume 7, Issue 25, 2018-2019, Pages 1789-1798]
-
Acidic ionic liquid
Synthesis of diaryloxindoles using a novel protic ionic liquid based on triazole [Volume 12, Issue 45, 2023, Pages 24-34]
-
Acoustic
Optimization of nano clay content on in-situ polymerization of polyurethane/polymethyl methacrylate interpenetrating network to study acoustic, thermal and mechanical properties of nanocomposites [Volume 6, Issue 24, 2017-2018, Pages 1747-1754]
-
Acrylated-Butadiene Rubber
Non-isothermal crystallization kinetics of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of polybutadiene modified with acrylic acid as compatibilzer [Volume 8, Issue 31, 2019-2020, Pages 2270-2278]
-
Acrylic
Evaluation of Additive and Filler Effects on Water-based Traffic Nanocomposite Coatings [Volume 2, Issue 7, 2013-2014, Pages 445-454]
-
Acrylic copolymer
Hydrophobic coatings based on acrylic copolymers and the effect of adding nano silica [Volume 6, Issue 23, 2017-2018, Pages 1655-1668]
-
Acrylic-polyol
Self-Stratifying Metallic Coating Formulation Based on Polyurethane using Taguchi Experimental Design Method [Volume 9, Issue 34, 2020, Pages 2490-2500]
-
Activated sludge
Landfill Leachate Treatment Using Nanostructured Polymeric Membrane in Adsorption Osmotic Membrane Bioreactor [Volume 8, Issue 31, 2019-2020, Pages 2280-2287]
-
Activation
Evaluation of Carbon Nano Webs produced by Needleless and Conventional Electro-spun PAN-MWCNT Nanofibers Precursor [Volume 8, Issue 31, 2019-2020, Pages 2212-2227]
-
Active coating
Nano-Composite Coating of Ni+RuO2 by Co-Elctrodeposition
Part I : Preparation, Electrochemical Properties and Stability [Volume 1, Issue 2, 2012-2013, Pages 49-60]
-
Active coating
Nano-Composite Coating of Ni+RuO2 by Co-Electrodeposition
Part II: Morphology, RuO2 paricle size distribution and substrate pretreatment [Volume 1, Issue 3, 2012-2013, Pages 177-184]
-
Active coating, co-deposition
Preparation, Electrochemical Properties and Stability of Sol-Gel Deriveed Nano-Composite
Coating of Ni+Ru02 [Volume 3, Issue 11, 2014-2015, Pages 777-786]
-
Active coating, sol-gel, ruthenium oxide
Characterixation of Sol-Gel Deriveed Nanocomposite Coating of Ni+RuO2 [Volume 4, Issue 15, 2015-2016, Pages 1031-1038]
-
Additive
Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensions [Volume 7, Issue 26, 2018-2019, Pages 1851-1857]
-
Adhesion
Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2016-2017, Pages 1331-1346]
-
Adhesion
Effect of acrylic resin functionality on primer adhesion used on the polyolefin surface [Volume 5, Issue 18, 2016-2017, Pages 1289-1295]
-
Adhesion
Evaluation of anticratering agent based on Epoxy-Aminopropyltriethoxy silane-diethanol
amine for cathodic electrocoating [Volume 3, Issue 11, 2014-2015, Pages 787-795]
-
Adhesion
Novel protective coatings based on silane [Volume 1, Issue 3, 2012-2013, Pages 193-204]
-
Adsorption
Surface modification of silk fibers by activated carbon nanotubes [Volume 7, Issue 25, 2018-2019, Pages 1763-1772]
-
Adsorption
Application of Ideal Adsorption Solution Theory (IAST) for Investigation of Separation of Carbon Dioxide / Nitrogen Gases on Nitrogen-doped Porous Carbon Synthesized from Nano-polyaniline [Volume 8, Issue 32, 2019-2020, Pages 2288-2300]
-
Adsorption
Evaluation Of Effectiveness Of The Artificial Neural Network For Modeling The Cyanide Ions Adsorption From Aqueous Solution Using Zno@MOF-199 Nanoadsorbent [Volume 9, Issue 36, 2020, Pages 2656-2666]
-
Adsorption
Investigation of adsorption of copper, zinc and cadmium metals by polymeric coagulant polyaluminum chloride based on density functional theory [Volume 10, Issue 37, 2021, Pages 2740-2747]
-
Advanced oxidation
Photocatalytic degradation of CI basic red 46 from aqueous solutions using SiO2/TiO2/Zeolite tertiary composites via advanced oxidation method [Volume 2, Issue 6, 2013-2014, Pages 427-439]
-
Ag
Study of photocatalytic properties of electrodeposited silver and zinc oxide thin films [Volume 10, Issue 37, 2021, Pages 2730-2738]
-
Ag- doped ZnS
Preparation of Ag-doped ZnS Thin Films by RF Magnetron Sputtering [Volume 1, Issue 3, 2012-2013, Pages 205-212]
-
Aggregate Complex
Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir [Volume 5, Issue 20, 2016-2017, Pages 1421-1428]
-
Ag Nanoparticles
Silver photo-deposition on ZnO nanorods grown on Zn substrate and study of their optical and photocatalytic properties [Volume 10, Issue 39, 2021, Pages 2862-2870]
-
Ag nanostructures
Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth [Volume 6, Issue 23, 2017-2018, Pages 1635-1640]
-
Air pollution remediation
Air pollution remediation using nanofibrous filters based on metal-organic frameworks (MOFs) prepared through electrospinning [Volume 10, Issue 37, 2021, Pages 2690-2704]
-
Alkaline hydrolysis
Influence of Citric and Maleic Acid on Photo Catalytic Properties of Nano TiO2/Polysiloxane on Polyester fabric [Volume 2, Issue 7, 2013-2014, Pages 496-508]
-
Alkylation
The synthesis of two newdyes based on indoline and the investigation of their photovotalic properties [Volume 2, Issue 6, 2013-2014, Pages 420-426]
-
Alpha-Cellulose
Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2014-2015, Pages 861-872]
-
Aluminium
Influence of the Presence of Silver Nanowires on the hardness, tribological behavior and Corrosion Properties of Aluminum Anodizing coating [Volume 8, Issue 30, 2019-2020, Pages 2140-2150]
-
Aluminum
Improvement of Corrosion Resistance of Aluminum by Application of Alumina-Zirconia Nanocomposite Coating via Sol-Gel Method [Volume 4, Issue 16, 2015-2016, Pages 1111-1118]
-
Aluminum
Effect of Surface Nanocrystalization on the Properties of Micro Arc Oxidation Coating on Aluminum [Volume 5, Issue 18, 2016-2017, Pages 1267-1277]
-
Aluminum matrix composite
Comparison between the effects of microwave and conventional sintering
on the microstructure and mechanical properties of metal-base Al-WC
composites [Volume 4, Issue 15, 2015-2016, Pages 1081-1086]
-
Ammonium polyphosphate
Flame-Retardant Advanced Materials based on Binary and Ternary Polymer Blends: Morphology, Thermal Stability and Flame Retardancy [Volume 11, Issue 44, 2023, Pages 3144-3152]
-
Amorphous carbon
Growth kinetic study of amorphous carbon thin film deposited by Ion Beam Sputtering deposition (IBSD) method using Avrami's model [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Anode
Electrochemical investigation of SEI layer in the formation process of natural graphite anode in Li-ion battery [Volume 7, Issue 26, 2018-2019, Pages 1825-1832]
-
Anodization
Investigation of effective parameters in the formation of nanoporous and
regular anodized aluminum oxide structures [Volume 6, Issue 21, 2017-2018, Pages 1531-1541]
-
Anodized Aluminum Oxide
Investigation of effective parameters in the formation of nanoporous and
regular anodized aluminum oxide structures [Volume 6, Issue 21, 2017-2018, Pages 1531-1541]
-
Anodizing
Investigation the Effect of Voltage on the Microstructure and Corrosion Behavior of 5083 Aluminum Alloy Anodizing Coating [Volume 10, Issue 37, 2021, Pages 2718-2729]
-
Anodizong
Influence of the Presence of Silver Nanowires on the hardness, tribological behavior and Corrosion Properties of Aluminum Anodizing coating [Volume 8, Issue 30, 2019-2020, Pages 2140-2150]
-
Antibiotic
The effects of Ag nanoparticles deposition on the photocatalytic activity of C3N4 for the degradation of tetracycline [Volume 9, Issue 36, 2020, Pages 2644-2654]
-
Anticorrosion pigment
Anticorrosion pigments based on zinc phosphate [Volume 1, Issue 3, 2012-2013, Pages 159-176]
-
Antistatic- Coatings
Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2015-2016, Pages 1119-1128]
-
Aqueous medium
Isolation of Organic Contaminants (Dyes) Using Modified Surface Sodium Zeolite: Isotherm and Bleaching Kinetics [Volume 10, Issue 39, 2021, Pages 2908-2923]
-
Aqueous method
Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2015-2016, Pages 1169-1178]
-
Artificial Neural Network
Evaluation Of Effectiveness Of The Artificial Neural Network For Modeling The Cyanide Ions Adsorption From Aqueous Solution Using Zno@MOF-199 Nanoadsorbent [Volume 9, Issue 36, 2020, Pages 2656-2666]
-
Atomic force microscopy
Effects of Temperature on Corrosion Resistance of NanoZirconia-Based Conversion Coating [Volume 3, Issue 12, 2014-2015, Pages 831-840]
-
Atomic force microscopy
Study of the Sound Absorption Behavior and Cell walls Roughness of Flexible Polyurethane Foams [Volume 6, Issue 24, 2017-2018, Pages 1733-1739]
-
Atomic Oxygen
Evaluation of Thermo-Optical Properties of Black Thermal Control Polyurethane Coating
and the Effect of Atomic Oxygen on the Coating [Volume 3, Issue 11, 2014-2015, Pages 763-776]
-
Atomic simulation
Investigation of the effect of deposition temperature of pyrolysis spray method on superhydrophobic coatings of stearic acid modified alumina nanoparticles on stainless steel [Volume 10, Issue 38, 2021, Pages 2792-2804]
-
Automotive coatings
Synthesis and characterization of water-reducible polyester-acrylate used in automotive paint industry [Volume 9, Issue 36, 2020, Pages 2632-2643]
-
Avrami growth model
Growth kinetic study of amorphous carbon thin film deposited by Ion Beam Sputtering deposition (IBSD) method using Avrami's model [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Azacyanine
Synthesis, Characterization and Investigation of Color Properties of Some New Cationic Dyes Based On Benzothiazole [Volume 1, Issue 2, 2012-2013, Pages 71-80]
-
Azole
Evaluation of the anti-corrosion effect of clay based nanopigments modified with organic azole compounds [Volume 6, Issue 23, 2017-2018, Pages 1641-1654]
B
-
Band gap
Synthesis and characterization of CuSbS2 nanocrystals via hot injection route and investigation of sulfur precursor source [Volume 5, Issue 20, 2016-2017, Pages 1415-1420]
-
Band gap
Synthesis and evaluation of ZnFe2-xAlxO4 spinel ferrite nanopigments with high NIR reflectance [Volume 6, Issue 22, 2017-2018, Pages 1559-1568]
-
Band gap
Synthesis and investigation of band energy variations in Pbs nanocrystallites via optical route [Volume 2, Issue 6, 2013-2014, Pages 403-409]
-
Band Structure
Investigation of adsorption of copper, zinc and cadmium metals by polymeric coagulant polyaluminum chloride based on density functional theory [Volume 10, Issue 37, 2021, Pages 2740-2747]
-
Barium and strontium hexaferrite nanoparticles
The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Method [Volume 7, Issue 26, 2018-2019, Pages 1859-1869]
-
Basic dye
Application of poly(amidoamine) dendrimer as a retarding agent in acrylic dyeing with a basic dye [Volume 4, Issue 14, 2015-2016, Pages 983-990]
-
Benzene
Study on the effect of photocatalytic benzene elimination reaction on the tensile strength of water-based acrylic paint [Volume 4, Issue 15, 2015-2016, Pages 1059-1068]
-
Benzoxanthene-3
Synthesis of benzoxanthene-3,4-carboxilic anhydride and application in dye-sensitized solar cell [Volume 7, Issue 27, 2018-2019, Pages 1887-1897]
-
Bicyclic aziridine
Synthesis and investigation of photochoromic behavior of bicyclic aziridine based on calix pyrrole as an intelligent molecule [Volume 1, Issue 2, 2012-2013, Pages 41-48]
-
Biocompatibility
Properties and applications of hydrogels in medicine: A review [Volume 8, Issue 29, 2019-2020, Pages 2116-2128]
-
Biocompatibility
Microstructural, Electrochemical and Biocompatibility Investigation of TiO2 Coating on AZ91D by magnetron sputtering method [Volume 8, Issue 31, 2019-2020, Pages 2248-2257]
-
Biocompatible polymer
Production of Conductive Biocompatible Nanofibrous Substrate made of PLGA/PCL/PANI [Volume 6, Issue 22, 2017-2018, Pages 1597-1603]
-
Biodegradability
Properties and applications of hydrogels in medicine: A review [Volume 8, Issue 29, 2019-2020, Pages 2116-2128]
-
Biomimicking materials
Mimicking mechanical properties of human tissues with 3D printable polyurethane-based elastomeric-hydrogels [Volume 11, Issue 41, 2023, Pages 3134-3142]
-
Biosensor
Synthesis and Characterization of Mn-Doped ZnO quantum dots utilizable in optical biosensors [Volume 1, Issue 3, 2012-2013, Pages 213-218]
-
Bisphenol A
Evaluation of simultaneous presence of epoxy and polyester resins containing silica nanoparticles in the structure of foodstuff can coatings [Volume 10, Issue 39, 2021, Pages 2882-2897]
-
Bleaching
Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2014-2015, Pages 861-872]
-
Blue
Synthesis and Characterization of Fe-Based Metal-Organic Frameworks:
MIL53 (Fe) for Methylene Blue Degradation [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Butadiene Rubber
Non-isothermal crystallization kinetics of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of polybutadiene modified with acrylic acid as compatibilzer [Volume 8, Issue 31, 2019-2020, Pages 2270-2278]
-
Butyl acrylate
Production of Electrophotographic Toner using in stiu Emulsion Copolymerization of Styrene-Butyl acrylate [Volume 9, Issue 36, 2020, Pages 2678-2688]
C
-
Cactus solutes
Application of Cactus on Textiles as a Shielding Agent against Electromagnetic Waves [Volume 10, Issue 39, 2021, Pages 2898-2907]
-
Cadmium sulfide
Effect of ZnO seed layer on the growth of CdS nanostructures for optoelectronic applications [Volume 9, Issue 35, 2020, Pages 2590-2600]
-
Calcification
Synthesis and Synthesis Mechanism of Piezoelectric Powder Sodium Potassium Anhydride (KNN) Calcified at High and Low Temperatures [Volume 5, Issue 20, 2016-2017, Pages 1449-1469]
-
Calcium Carbonate
Evaluation of Effective Parameters on Rheological and Mechanical Properties of Automotive Plastisol Coatings Reinforced with Nano Silica Using Taguchi Method [Volume 7, Issue 27, 2018-2019, Pages 1925-1936]
-
Calcium Carbonate
Evaluation of rheological properties and shear strength of modified plastisol by nano-silica and nano-calcium carbonate using Taguchi method [Volume 10, Issue 40, 2021, Pages 2966-2977]
-
Calix[4]pyrrole
Synthesis and investigation of photochoromic behavior of bicyclic aziridine based on calix pyrrole as an intelligent molecule [Volume 1, Issue 2, 2012-2013, Pages 41-48]
-
Capping agent
Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2015-2016, Pages 1169-1178]
-
Carbon
Investigation of mechanochemical reduction of CrO3-V2O5-Mg-C composite system [Volume 7, Issue 28, 2018-2019, Pages 1964-1973]
-
Carbon black pigment
Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2016-2017, Pages 1331-1346]
-
Carbon nanotube  
Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
-
Carbon Nanotube
Investigating the effect of carbon nanotubes containing carboxyl and hydroxyl functional groups on the rheological properties of water-based drilling fluid [Volume 11, Issue 44, 2023, Pages 3182-3195]
-
Carbon Nano Tube
Investigating the effect of delamination on self-diagnostic behavior of carbon/CNT epoxy composites [Volume 11, Issue 44, 2023, Pages 3154-3168]
-
Carbon nanotubes
Investigation of Effective parameters on the Density of Vertically-Aligned Carbon Nanotubes Synthesized by CVD Method [Volume 2, Issue 7, 2013-2014, Pages 463-473]
-
Carbon nanotubes
Effect of carbon nanotubes concentration on wear resistance of nickel-boron-carbon nanotubes coatings [Volume 7, Issue 27, 2018-2019, Pages 1917-1924]
-
Carbon nanotubes
Evaluation of Carbon Nano Webs produced by Needleless and Conventional Electro-spun PAN-MWCNT Nanofibers Precursor [Volume 8, Issue 31, 2019-2020, Pages 2212-2227]
-
Carbon nanotubes
Investigation of photocatalytic efficiency of BiSI/BiOI/CNT composite for the Degradation of Malachite Green [Volume 9, Issue 35, 2020, Pages 2612-2621]
-
Carbon Nitride
The effects of Ag nanoparticles deposition on the photocatalytic activity of C3N4 for the degradation of tetracycline [Volume 9, Issue 36, 2020, Pages 2644-2654]
-
Carburization
Combination of weld cladding and Carburization treatment to Reconstruction of Industrial Parts of DIN-25CrMo4 Steel [Volume 7, Issue 25, 2018-2019, Pages 1809-1814]
-
Carpet
The use of a fluorescent dye in the dyeing of wool fibers in carpet Naphthalimide [Volume 5, Issue 17, 2016-2017, Pages 1243-1250]
-
Castor oil
Synthesis of leather fatliquoring agent with using castor oil/metallic organic
frameworks (MOFs) via Pickering emulsion polymerization [Volume 6, Issue 21, 2017-2018, Pages 1543-1549]
-
Cathodic electrodeposition
Evaluation of anticratering agent based on Epoxy-Aminopropyltriethoxy silane-diethanol
amine for cathodic electrocoating [Volume 3, Issue 11, 2014-2015, Pages 787-795]
-
C-doped ZnO
Studying the UV protection of the cotton fabric coated with MOF-derived C@ZnO and photocatalytic activity of synthesized nanoparticles [Volume 11, Issue 44, 2023, Pages 3196-3204]
-
Cellulose
Investigation graft polymerization of cyclodextrin derivative on the surface of cellulose by applying plasma technic [Volume 10, Issue 38, 2021, Pages 2816-2836]
-
Cellulose Acetate Butyrate (CAB)
Investigation on Synthesis and Applied Properties of Cellulose Acetate Butyrate Polymers (CAB) [Volume 9, Issue 33, 2020, Pages 2392-2399]
-
Ceramic Coating
Improvement of Corrosion Resistance of Aluminum by Application of Alumina-Zirconia Nanocomposite Coating via Sol-Gel Method [Volume 4, Issue 16, 2015-2016, Pages 1111-1118]
-
Cerium conversion coating
Evaluation of Cerium conversion Coating Parameters on Strength and Adhesion Properties of Optimized Epoxy Adhesives containing Butadiene Elastomers and Graphene Oxide Particles [Volume 9, Issue 33, 2020, Pages 2434-2450]
-
Cerium dioxide nanoparticle
The Effect of Inorganic Nanoparticles on Diffuse Reflectance Behavior of the Printed Cotton/Nylon Blend Fabric in Near Infrared and Short-Wave Infrared Spectral Ranges [Volume 8, Issue 30, 2019-2020, Pages 2188-2198]
-
Cerium nitrate
Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion
Resistance Epoxy Coating [Volume 5, Issue 19, 2016-2017, Pages 1353-1361]
-
Characterization
Preparation of Ag-doped ZnS Thin Films by RF Magnetron Sputtering [Volume 1, Issue 3, 2012-2013, Pages 205-212]
-
Chemical Bath Deposition
Effect of ZnO seed layer on the growth of CdS nanostructures for optoelectronic applications [Volume 9, Issue 35, 2020, Pages 2590-2600]
-
Chemical modification
Study of dyeing properties of chitosan-cyanuric chloride treated wool fabrics [Volume 1, Issue 3, 2012-2013, Pages 219-228]
-
Chemical Vapor Deposition
Investigation of Effective parameters on the Density of Vertically-Aligned Carbon Nanotubes Synthesized by CVD Method [Volume 2, Issue 7, 2013-2014, Pages 463-473]
-
Chemical Vapor Deposition
Synthesis and investigation of the effect of precursor on hematite morphology using chemical vapor deposition layer for photoelectrochemical applications [Volume 10, Issue 39, 2021, Pages 2924-2933]
-
Chitosan
Study of dyeing properties of chitosan-cyanuric chloride treated wool fabrics [Volume 1, Issue 3, 2012-2013, Pages 219-228]
-
Chitosan
Fabrication and characterization of hemostatic wound dressing based on chitosan/tannic acid/zeolitic imidazole framework (ZIF-8) composite nanofibers [Volume 10, Issue 38, 2021, Pages 2806-2815]
-
Chlor-alkali cathode
Nano-Composite Coating of Ni+RuO2 by Co-Electrodeposition
Part II: Morphology, RuO2 paricle size distribution and substrate pretreatment [Volume 1, Issue 3, 2012-2013, Pages 177-184]
-
Chloralkali cathode
Nano-Composite Coating of Ni+RuO2 by Co-Elctrodeposition
Part I : Preparation, Electrochemical Properties and Stability [Volume 1, Issue 2, 2012-2013, Pages 49-60]
-
CIELCH color coordinates
Physical and Dyeing Properties of ellulosic fabric dyed by C.I. reactive dye Red 128 in the presence of Imidazoline Hydrochloride as an ionic liquid [Volume 5, Issue 17, 2016-2017, Pages 1195-1204]
-
Citric acid
Surface modification of silk fibers by activated carbon nanotubes [Volume 7, Issue 25, 2018-2019, Pages 1763-1772]
-
CK45 steel
Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW process [Volume 8, Issue 29, 2019-2020, Pages 2048-2059]
-
Cladding
Combination of weld cladding and Carburization treatment to Reconstruction of Industrial Parts of DIN-25CrMo4 Steel [Volume 7, Issue 25, 2018-2019, Pages 1809-1814]
-
Cladding
Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW process [Volume 8, Issue 29, 2019-2020, Pages 2048-2059]
-
CO2
Potassium Sodium Niobate Lead-free Piezoelectric Ceramics: Difficulties inthe Processing and the Advantages of Iran: The Case of Iran and Slovenia [Volume 4, Issue 16, 2015-2016, Pages 1148-1158]
-
CO2
Application of Ideal Adsorption Solution Theory (IAST) for Investigation of Separation of Carbon Dioxide / Nitrogen Gases on Nitrogen-doped Porous Carbon Synthesized from Nano-polyaniline [Volume 8, Issue 32, 2019-2020, Pages 2288-2300]
-
Coagulation
Landfill Leachate Treatment Using Nanostructured Polymeric Membrane in Adsorption Osmotic Membrane Bioreactor [Volume 8, Issue 31, 2019-2020, Pages 2280-2287]
-
Coatings resistance
Study of resistance of applied mineral resin coating for stabilization of nanoparticles TiO2 to remove organic pollutants from waste water of paint and coating industries [Volume 6, Issue 24, 2017-2018, Pages 1741-1746]
-
Coating surface
Formation of Composite Layer Containing Silicon Carbide particles on the A106 Steel Surface by Tungsten Inert Gas (TIG) [Volume 4, Issue 14, 2015-2016, Pages 1005-1014]
-
Cobalt
A Review to the Effects of Cations Replacement on the Properties of Combined
Spinels Based on Cobalt, Zinc and Magnesium [Volume 6, Issue 21, 2017-2018, Pages 1489-1505]
-
Co-deposition
Nano-Composite Coating of Ni+RuO2 by Co-Elctrodeposition
Part I : Preparation, Electrochemical Properties and Stability [Volume 1, Issue 2, 2012-2013, Pages 49-60]
-
Co-deposition
Nano-Composite Coating of Ni+RuO2 by Co-Electrodeposition
Part II: Morphology, RuO2 paricle size distribution and substrate pretreatment [Volume 1, Issue 3, 2012-2013, Pages 177-184]
-
COD removal
Landfill Leachate Treatment Using Nanostructured Polymeric Membrane in Adsorption Osmotic Membrane Bioreactor [Volume 8, Issue 31, 2019-2020, Pages 2280-2287]
-
Color
The effect of color component on readability of urban advertising [Volume 8, Issue 32, 2019-2020, Pages 2358-2368]
-
Colored concrete
Making and investigating the effect of chemical pigments on the compressive, tensile, abrasion and water absorption resistance of colored concrete with an emphasis on urban beautification [Volume 10, Issue 40, 2021, Pages 3032-3047]
-
Coloring
Coloring of compound based on polypropylene/talc using titan dioxide: The effect of titan dioxide particle size in nano and micro [Volume 5, Issue 18, 2016-2017, Pages 1279-1288]
-
Composite
Fabrication and evalution of polyvinylidine fluride-barium sulfate composite coating for camouflage of target in snowy environments [Volume 3, Issue 11, 2014-2015, Pages 753-762]
-
Composite
Photocatalytic degradation of CI basic red 46 from aqueous solutions using SiO2/TiO2/Zeolite tertiary composites via advanced oxidation method [Volume 2, Issue 6, 2013-2014, Pages 427-439]
-
Composite nanofibers
Hybrid Pizo-Triboelectric Energy Nanogenerator from Woollen fabric and PVDF/BaTiO3 Nanofibrous Layer [Volume 9, Issue 34, 2020, Pages 2474-2481]
-
Composite nanofibers
Air pollution remediation using nanofibrous filters based on metal-organic frameworks (MOFs) prepared through electrospinning [Volume 10, Issue 37, 2021, Pages 2690-2704]
-
Composite nanofibers
Fabrication and characterization of hemostatic wound dressing based on chitosan/tannic acid/zeolitic imidazole framework (ZIF-8) composite nanofibers [Volume 10, Issue 38, 2021, Pages 2806-2815]
-
Compressive strength
Making and investigating the effect of chemical pigments on the compressive, tensile, abrasion and water absorption resistance of colored concrete with an emphasis on urban beautification [Volume 10, Issue 40, 2021, Pages 3032-3047]
-
Conducting Polymer
Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016-2017, Pages 1215-1222]
-
Conductive coating
Mathematical Model to determine the electrical resistivity characteristics of composite coatings based on conductive carbon black [Volume 5, Issue 17, 2016-2017, Pages 1239-1242]
-
Conductive composite
Synthesis and Electrical Conductivity Evaluation of Cross-linked Starch-Nanoclay Montmorillonite/Graphene Nanocomposite [Volume 9, Issue 34, 2020, Pages 2512-2518]
-
Conductive nanofibrous structure
Production of Conductive Nanofibrous Core–Shell Scaffolds to Regenerate Spinal Cord Injury [Volume 6, Issue 23, 2017-2018, Pages 1681-1690]
-
Conductive polymer
Production of Conductive Biocompatible Nanofibrous Substrate made of PLGA/PCL/PANI [Volume 6, Issue 22, 2017-2018, Pages 1597-1603]
-
Conductive polymer
Synthesizing of molecularly imprinted nanocomposites for using as diazinon
sensor [Volume 6, Issue 21, 2017-2018, Pages 1507-1514]
-
Conductivity of nanofibers
Production of Conductive Biocompatible Nanofibrous Substrate made of PLGA/PCL/PANI [Volume 6, Issue 22, 2017-2018, Pages 1597-1603]
-
Constant current
Comparison between constant current electrochemical and pulse current approach in reduction of graphene oxide on nickel-nickel oxide foam [Volume 7, Issue 28, 2018-2019, Pages 2002-2008]
-
Contrast
The effect of color component on readability of urban advertising [Volume 8, Issue 32, 2019-2020, Pages 2358-2368]
-
Conversion coating
Effects of Temperature on Corrosion Resistance of NanoZirconia-Based Conversion Coating [Volume 3, Issue 12, 2014-2015, Pages 831-840]
-
Conversion coating
Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel [Volume 4, Issue 14, 2015-2016, Pages 965-974]
-
Conversion coatings
The Study of Corrosion Resistance Behavior of Epoxy Nano Composite on Modified Steel using Conversion Coating Based on Hexa fluorozirconic Acid [Volume 2, Issue 7, 2013-2014, Pages 480-489]
-
Conversion coatings
Surface modification of AZ31 magnesium alloy to improve the corrosion resistance via eco-friendly conversion coatings based on praseodymium rare earth element [Volume 7, Issue 25, 2018-2019, Pages 1781-1787]
-
Conversion coatings
Studying the anti-corrosive properties of a polyurethane coating on the AZ31 magnesium alloy via surface chemical modification by nano-conversion coatings based on praseodymium [Volume 6, Issue 24, 2017-2018, Pages 1719-1726]
-
Conversion efficiency
The synthesis of two newdyes based on indoline and the investigation of their photovotalic properties [Volume 2, Issue 6, 2013-2014, Pages 420-426]
-
Cool coatings
Synthesis and evaluation of ZnFe2-xAlxO4 spinel ferrite nanopigments with high NIR reflectance [Volume 6, Issue 22, 2017-2018, Pages 1559-1568]
-
Cool coatings
The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015-2016, Pages 975-982]
-
Co-precipitation
The effects of surfactant concentration on the properties of magnetite nanoparticles used in the production of electrophotography toner via emulsion aggregation method [Volume 2, Issue 6, 2013-2014, Pages 394-387]
-
Co-precipitation
The effect of reduced graphene oxide on photo-catalytic degradation Rhodamine B [Volume 7, Issue 25, 2018-2019, Pages 1773-1780]
-
Cordierite
Evaluation of rheological parameters of cordierite suspensions [Volume 6, Issue 22, 2017-2018, Pages 1577-1586]
-
Core-shell
Fabrication of Coaxial Electrospun Phase Change Cellulose Acetate/ Polyethylene Glycol Nanofibers toward Thermal Energy Storage [Volume 2, Issue 7, 2013-2014, Pages 455-462]
-
Corrosion behavior
Investigation the Effect of Voltage on the Microstructure and Corrosion Behavior of 5083 Aluminum Alloy Anodizing Coating [Volume 10, Issue 37, 2021, Pages 2718-2729]
-
Corrosion inhibitor
Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion
Resistance Epoxy Coating [Volume 5, Issue 19, 2016-2017, Pages 1353-1361]
-
Corrosion inhibitor
Synthesis of Nitro derivatives phenyl hydrazinocarbonyl acrylic acid and their use as corrosion inhibitor agent in temporary coatings [Volume 6, Issue 23, 2017-2018, Pages 1669-1679]
-
Corrosion inhibitors
Novel protective coatings based on silane [Volume 1, Issue 3, 2012-2013, Pages 193-204]
-
Corrosion Properties
Effect of silicon carbide nanoparticles on the properties of polyurethane coatings applied on steel substrates [Volume 3, Issue 11, 2014-2015, Pages 743-751]
-
Corrosion protection
The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013-2014, Pages 395-402]
-
Corrosion protection
Novel protective coatings based on silane [Volume 1, Issue 3, 2012-2013, Pages 193-204]
-
Corrosion Resistance
Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion
Resistance Epoxy Coating [Volume 5, Issue 19, 2016-2017, Pages 1353-1361]
-
Corrosion Resistance
Effect of Surface Nanocrystalization on the Properties of Micro Arc Oxidation Coating on Aluminum [Volume 5, Issue 18, 2016-2017, Pages 1267-1277]
-
Corrosion Resistance
Studying the corrosion resistance of an epoxy clay nanocoating using salt spray test and electrochemical impedance spectroscopy [Volume 1, Issue 2, 2012-2013, Pages 3-12]
-
Corrosion Resistance
Surface modification of AZ31 magnesium alloy to improve the corrosion resistance via eco-friendly conversion coatings based on praseodymium rare earth element [Volume 7, Issue 25, 2018-2019, Pages 1781-1787]
-
Counter electrode
The Application of Carbon Fabric Coated with Polyaniline as a Sensitive Color Solar Cell Cathode [Volume 6, Issue 24, 2017-2018, Pages 1703-1718]
-
Crater
Evaluation of anticratering agent based on Epoxy-Aminopropyltriethoxy silane-diethanol
amine for cathodic electrocoating [Volume 3, Issue 11, 2014-2015, Pages 787-795]
-
Creep-recovery modeling
The effect of viscoelastic Parameters on the Protective performance of the Epoxy Coatings Using Creep-Recovery Modeling [Volume 9, Issue 35, 2020, Pages 2574-2588]
-
Crosslinking
Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method [Volume 10, Issue 40, 2021, Pages 2978-2990]
-
Crown Ether
Synthesis and Characterization of a Cellulose Acetate Based PIM for Water Treatment [Volume 6, Issue 22, 2017-2018, Pages 1619-1626]
-
Crystal Growth
Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth [Volume 6, Issue 23, 2017-2018, Pages 1635-1640]
-
Crystallite Size
Molecular dynamics simulation of the effect of size, crystallite shape, and defect on oxygen diffusion in SrTiO3 [Volume 7, Issue 26, 2018-2019, Pages 1843-1850]
-
Crystallization kinetics
Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fiber
I. Isothermal crystallization kinetics [Volume 7, Issue 28, 2018-2019, Pages 2022-2035]
-
Curing
Effect of curing time on the protective performance of ecofriendly silane sol-gel coating on mild steel [Volume 6, Issue 22, 2017-2018, Pages 1569-1576]
-
Curing
Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2014-2015, Pages 861-872]
-
Curing kinetic
The study of micro and nano glass flake effect on cure kinetik and anti-corrosion properties of epoxy vinyl ester composite coating [Volume 1, Issue 4, 2012-2013, Pages 275-286]
-
Current Density
Effect of current density on microstructure and corrosion behavior of Co-P-nano-Al2O3 composite coating [Volume 8, Issue 31, 2019-2020, Pages 2258-2268]
-
CuSbS2
Synthesis and characterization of CuSbS2 nanocrystals via hot injection route and investigation of sulfur precursor source [Volume 5, Issue 20, 2016-2017, Pages 1415-1420]
-
Cyanide
Evaluation Of Effectiveness Of The Artificial Neural Network For Modeling The Cyanide Ions Adsorption From Aqueous Solution Using Zno@MOF-199 Nanoadsorbent [Volume 9, Issue 36, 2020, Pages 2656-2666]
-
Cyanuric Chloride
Study of dyeing properties of chitosan-cyanuric chloride treated wool fabrics [Volume 1, Issue 3, 2012-2013, Pages 219-228]
-
Cyclic Voltammetry
The Application of Carbon Fabric Coated with Polyaniline as a Sensitive Color Solar Cell Cathode [Volume 6, Issue 24, 2017-2018, Pages 1703-1718]
D
-
DC polarization
The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013-2014, Pages 395-402]
-
Decolorization
Effect of Ag dopped group on the dye removal efficiency of TiO2-Ag and
ZnO-Ag nanophotocatalyst; a comparison study [Volume 4, Issue 15, 2015-2016, Pages 1071-1080]
-
Decontamination Coatings
Synthesis and Characterization of Polyacrylamideoxime and Its Nanofibers as Self-Decontamination Coatings [Volume 4, Issue 14, 2015-2016, Pages 1015-1022]
-
Delamination
Investigating the effect of delamination on self-diagnostic behavior of carbon/CNT epoxy composites [Volume 11, Issue 44, 2023, Pages 3154-3168]
-
Dendrimer
Application of poly(amidoamine) dendrimer as a retarding agent in acrylic dyeing with a basic dye [Volume 4, Issue 14, 2015-2016, Pages 983-990]
-
Density functional theory
interaction of Tetryl on the Surface of nanostructure of fullerene C24 [Volume 7, Issue 28, 2018-2019, Pages 1974-1988]
-
Deposition temperature
Investigation of the effect of deposition temperature of pyrolysis spray method on superhydrophobic coatings of stearic acid modified alumina nanoparticles on stainless steel [Volume 10, Issue 38, 2021, Pages 2792-2804]
-
Detection
Investigation of the properties and applications of magnetic metal-organic framework (MMOF) composites for detection and removal of environmental pollutants [Volume 9, Issue 35, 2020, Pages 2546-2572]
-
DFT
Investigation of adsorption of copper, zinc and cadmium metals by polymeric coagulant polyaluminum chloride based on density functional theory [Volume 10, Issue 37, 2021, Pages 2740-2747]
-
Diazinon determination
Synthesizing of molecularly imprinted nanocomposites for using as diazinon
sensor [Volume 6, Issue 21, 2017-2018, Pages 1507-1514]
-
Differential pulse voltammetry
Fabrication of electrochemical sensor based on polyzincon nanolayer for dopamine detection [Volume 9, Issue 35, 2020, Pages 2520-2530]
-
Direct red 80
Isolation of Organic Contaminants (Dyes) Using Modified Surface Sodium Zeolite: Isotherm and Bleaching Kinetics [Volume 10, Issue 39, 2021, Pages 2908-2923]
-
Direct Yellow Dye
Facile synthesis and investigation of Co3O4-ZnO-Ag nanocomposites as efficient photocatalysts for decomposition of direct yellow dye [Volume 8, Issue 30, 2019-2020, Pages 2166-2179]
-
Dispersant
Evaluation of rheological parameters of cordierite suspensions [Volume 6, Issue 22, 2017-2018, Pages 1577-1586]
-
DMTA
Development of a new method to evaluate chain entanglements density in low entangled UHMWPE and UHMWPE/Graphene nanocomposites [Volume 5, Issue 20, 2016-2017, Pages 1439-1447]
-
Dopamine
Fabrication of electrochemical sensor based on polyzincon nanolayer for dopamine detection [Volume 9, Issue 35, 2020, Pages 2520-2530]
-
Doping
Synthesis and Characterization of Mn-Doped ZnO quantum dots utilizable in optical biosensors [Volume 1, Issue 3, 2012-2013, Pages 213-218]
-
Drug Delivery
Preparation and study the structure of cellulosic nanofibers treated with β-cyclodextrin for gradual drug release [Volume 5, Issue 17, 2016-2017, Pages 1205-1214]
-
Dual-sensorØ› Molecularly imprinted polymer
A novel nano multi MIP sensor for simultaneous detection of cTnT & HbA1c [Volume 8, Issue 30, 2019-2020, Pages 2200-2210]
-
Dye
Photocatalytic degradation of CI basic red 46 from aqueous solutions using SiO2/TiO2/Zeolite tertiary composites via advanced oxidation method [Volume 2, Issue 6, 2013-2014, Pages 427-439]
-
Dye
Isolation of Organic Contaminants (Dyes) Using Modified Surface Sodium Zeolite: Isotherm and Bleaching Kinetics [Volume 10, Issue 39, 2021, Pages 2908-2923]
-
Dyeing: Acrylic fiber
Application of poly(amidoamine) dendrimer as a retarding agent in acrylic dyeing with a basic dye [Volume 4, Issue 14, 2015-2016, Pages 983-990]
-
Dye photo-degradation
The effect of reduced graphene oxide on photo-catalytic degradation Rhodamine B [Volume 7, Issue 25, 2018-2019, Pages 1773-1780]
-
Dyes
A review on synthesis, properties and application of advanced naphthalimide dyes [Volume 1, Issue 2, 2012-2013, Pages 13-30]
-
Dye sensitized solar cell
The Application of Carbon Fabric Coated with Polyaniline as a Sensitive Color Solar Cell Cathode [Volume 6, Issue 24, 2017-2018, Pages 1703-1718]
-
Dye sensitized solar cell
Using of Artemesia Absinthinum, Verbascum Thapsus, Viola Odorata, Matricaria Chamomilla and Corianderum Satirum natural dyes in making dye-sensitized solar cells [Volume 8, Issue 32, 2019-2020, Pages 2346-2356]
-
Dye-sensitized solar cell
The synthesis of two newdyes based on indoline and the investigation of their photovotalic properties [Volume 2, Issue 6, 2013-2014, Pages 420-426]
-
Dye-sensitized solar cells
Synthesis of benzoxanthene-3,4-carboxilic anhydride and application in dye-sensitized solar cell [Volume 7, Issue 27, 2018-2019, Pages 1887-1897]
-
Dynamic-mechanical properties
Synthesis and investigation of dynamic-mechanical properties of polystyrene, poly methyl methacrylate and poly buthyl acrylate IPNs with core/shell morphology [Volume 9, Issue 35, 2020, Pages 2602-2611]
-
Dynamic vulcanizate
Non-isothermal crystallization kinetics of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of polybutadiene modified with acrylic acid as compatibilzer [Volume 8, Issue 31, 2019-2020, Pages 2270-2278]
-
Dynamic Vulcanization
Preparation and investigation of mechanical properties of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of acrylic acid modified polybutadiene compatibilizer [Volume 8, Issue 30, 2019-2020, Pages 2187-2180]
E
-
Ecofriendly silane coating
Effect of curing time on the protective performance of ecofriendly silane sol-gel coating on mild steel [Volume 6, Issue 22, 2017-2018, Pages 1569-1576]
-
EDS
The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013-2014, Pages 395-402]
-
EIS
Deposition of aminopropyl trimethoxy silane on galvanized steel to improve corrosion resistance [Volume 3, Issue 11, 2014-2015, Pages 727-732]
-
EIS
Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012-2013, Pages 61-70]
-
Elastic modulus
Prediction of elastic modulus of epoxy/single wall carbon nanotube composites by considering interfacial debonding [Volume 5, Issue 19, 2016-2017, Pages 1371-1379]
-
Elastomeric Hydrogel
Mimicking mechanical properties of human tissues with 3D printable polyurethane-based elastomeric-hydrogels [Volume 11, Issue 41, 2023, Pages 3134-3142]
-
Elastomeric Nanoparticles
Thermal stability and thermal degradation of epoxy nanocomposites in the presence of full vulcanized elastomeric nanoparticles [Volume 10, Issue 37, 2021, Pages 2758-2770]
-
Electrochemical deposition
Synthesis of Cu2O-CuO two layer as photocathode and investigation of its photoelectrochemical properties [Volume 8, Issue 32, 2019-2020, Pages 2310-2318]
-
Electrochemical impedance spectroscopy(EIS)
The Study of Corrosion Resistance Behavior of Epoxy Nano Composite on Modified Steel using Conversion Coating Based on Hexa fluorozirconic Acid [Volume 2, Issue 7, 2013-2014, Pages 480-489]
-
Electrochemical Impedance Spectroscopy (EIS)
Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel [Volume 4, Issue 14, 2015-2016, Pages 965-974]
-
Electrochemically reduced graphene oxide
Comparison between constant current electrochemical and pulse current approach in reduction of graphene oxide on nickel-nickel oxide foam [Volume 7, Issue 28, 2018-2019, Pages 2002-2008]
-
Electrochemical sensor
Synthesizing of molecularly imprinted nanocomposites for using as diazinon
sensor [Volume 6, Issue 21, 2017-2018, Pages 1507-1514]
-
Electrochemical sensor
Synthesis of Graphene- Poly Catechol Conductive Polymer Nanocomposite Production by Electropolymerization for use in electrochemical sensors [Volume 9, Issue 33, 2020, Pages 2380-2391]
-
Electrochemical sensor
Fabrication of electrochemical sensor based on polyzincon nanolayer for dopamine detection [Volume 9, Issue 35, 2020, Pages 2520-2530]
-
Electro deposition
Viscosity stabilization of Nano-Composites of PVC Plastisol in underbody coating on (PVC/Closite-30B/ZnO) [Volume 5, Issue 19, 2016-2017, Pages 1381-1388]
-
Electrodepotion
Study of photocatalytic properties of electrodeposited silver and zinc oxide thin films [Volume 10, Issue 37, 2021, Pages 2730-2738]
-
Electrographic Toner
Production of Electrophotographic Toner using in stiu Emulsion Copolymerization of Styrene-Butyl acrylate [Volume 9, Issue 36, 2020, Pages 2678-2688]
-
Electrophoresis
Using of Artemesia Absinthinum, Verbascum Thapsus, Viola Odorata, Matricaria Chamomilla and Corianderum Satirum natural dyes in making dye-sensitized solar cells [Volume 8, Issue 32, 2019-2020, Pages 2346-2356]
-
Electroplating
Investigation of Morphology, Electrical and Electrochemical Properties of Gold Coating on Metallic Bipolar Plates of Fuel Cells [Volume 8, Issue 32, 2019-2020, Pages 2334-2335]
-
Electroplating
Investigation of the high temperature corrosion behavior of AISI 304 steel coated with Ni-Co-CeO2-ZrO2 composite [Volume 11, Issue 41, 2023, Pages 3084-3094]
-
Electropolymerisation
Corrosion resistance of polyaniline coatings formed by electropolymerization on titanium grade 2 [Volume 7, Issue 27, 2018-2019, Pages 1899-1907]
-
Electrospinning
Preparation and study the structure of cellulosic nanofibers treated with β-cyclodextrin for gradual drug release [Volume 5, Issue 17, 2016-2017, Pages 1205-1214]
-
Electrospinning
Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2016-2017, Pages 1429-1437]
-
Electrospinning
Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process [Volume 3, Issue 12, 2014-2015, Pages 799-808]
-
Electrospinning
Synthesis and Characterization of Polyacrylamideoxime and Its Nanofibers as Self-Decontamination Coatings [Volume 4, Issue 14, 2015-2016, Pages 1015-1022]
-
Electrospinning
Preparation and Characterization of Thermally Stable Nanofiber Based on Polyamide 66/ Poly (amide-imide) Blend [Volume 7, Issue 26, 2018-2019, Pages 1871-1879]
-
Electrospinning
Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method [Volume 10, Issue 40, 2021, Pages 2978-2990]
-
Electrospinning
Fabrication of SiO2 and SnO2 composite nanofibers in order to increase the photocatalytic degradation under ultraviolet light. [Volume 11, Issue 41, 2023, Pages 3112-3123]
-
Electrospun scaffold
Production of Conductive Nanofibrous Core–Shell Scaffolds to Regenerate Spinal Cord Injury [Volume 6, Issue 23, 2017-2018, Pages 1681-1690]
-
Emulsion/Aggregation
The effects of surfactant concentration on the properties of magnetite nanoparticles used in the production of electrophotography toner via emulsion aggregation method [Volume 2, Issue 6, 2013-2014, Pages 394-387]
-
Emulsion polymerization
Mechanism of particle formation, morphology and mechanical properties of
hybrid and pure PMMA latexes prepared via Pickering and surfactant-free
emulsion polymerization [Volume 4, Issue 15, 2015-2016, Pages 1087-1096]
-
Encapsulation
Fabrication of Coaxial Electrospun Phase Change Cellulose Acetate/ Polyethylene Glycol Nanofibers toward Thermal Energy Storage [Volume 2, Issue 7, 2013-2014, Pages 455-462]
-
Energy harvesting
Hybrid Pizo-Triboelectric Energy Nanogenerator from Woollen fabric and PVDF/BaTiO3 Nanofibrous Layer [Volume 9, Issue 34, 2020, Pages 2474-2481]
-
Enthalpy
Synthesis of high entropy alloy FeCoNiCuAl and investigation of enthalpy effect in phase separation [Volume 11, Issue 44, 2023, Pages 3220-3233]
-
Environment
Anticorrosion pigments based on zinc phosphate [Volume 1, Issue 3, 2012-2013, Pages 159-176]
-
Environmental pollution
Investigation of the properties and applications of magnetic metal-organic framework (MMOF) composites for detection and removal of environmental pollutants [Volume 9, Issue 35, 2020, Pages 2546-2572]
-
Epoxy
Impact strength increasing and toughening mechanism of epoxy resin [Volume 3, Issue 12, 2014-2015, Pages 873-884]
-
Epoxy
Physical, Mechanical and Thermal Properties of Epoxy Coatings Modified with Nitrile-Butadiene Nano-rubber [Volume 7, Issue 28, 2018-2019, Pages 2036-2047]
-
Epoxy Coating
Studying the corrosion resistance of an epoxy clay nanocoating using salt spray test and electrochemical impedance spectroscopy [Volume 1, Issue 2, 2012-2013, Pages 3-12]
-
Epoxy Coating
The effect of viscoelastic Parameters on the Protective performance of the Epoxy Coatings Using Creep-Recovery Modeling [Volume 9, Issue 35, 2020, Pages 2574-2588]
-
Epoxy-Polyester Hybrid
Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012-2013, Pages 61-70]
-
Epoxy resin
Improving thermal, flame retardant and mechanical properties of epoxy resin via expandable graphite [Volume 2, Issue 6, 2013-2014, Pages 410-419]
-
Epoxy resin
Evaluation of Cerium conversion Coating Parameters on Strength and Adhesion Properties of Optimized Epoxy Adhesives containing Butadiene Elastomers and Graphene Oxide Particles [Volume 9, Issue 33, 2020, Pages 2434-2450]
-
Epoxy resin
Thermal stability and thermal degradation of epoxy nanocomposites in the presence of full vulcanized elastomeric nanoparticles [Volume 10, Issue 37, 2021, Pages 2758-2770]
-
Epoxy-Silica
Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2015-2016, Pages 1119-1128]
-
Esterification
Investigation on Synthesis and Applied Properties of Cellulose Acetate Butyrate Polymers (CAB) [Volume 9, Issue 33, 2020, Pages 2392-2399]
-
Etch
Properties of MXene and its synthesis methods [Volume 12, Issue 45, 2023, Pages 1-22]
-
Ethanol flow rate
Investigation of Effective parameters on the Density of Vertically-Aligned Carbon Nanotubes Synthesized by CVD Method [Volume 2, Issue 7, 2013-2014, Pages 463-473]
-
Expandable graphiteØŒPhysical and mechanical properties
Improving thermal, flame retardant and mechanical properties of epoxy resin via expandable graphite [Volume 2, Issue 6, 2013-2014, Pages 410-419]
F
-
Failure
Failure mechanisms and their finite element modeling of air plasma spray thermal barrier coatings: A review [Volume 7, Issue 27, 2018-2019, Pages 1937-1953]
-
Fatliquoring agent
Synthesis of leather fatliquoring agent with using castor oil/metallic organic
frameworks (MOFs) via Pickering emulsion polymerization [Volume 6, Issue 21, 2017-2018, Pages 1543-1549]
-
Fe2O3 nanoparticles
Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating [Volume 3, Issue 11, 2014-2015, Pages 733-741]
-
Fe3O4/Ag nanocomposite
The Study of Nanostructure, Magnetic Properties and Photocatalytic Behavior of Fe3O4/Ag Nanocomposites Synthesized by Microwave Method [Volume 9, Issue 34, 2020, Pages 2462-2473]
-
Fe3O4 nanoparticles
The Study of Nanostructure, Magnetic Properties and Photocatalytic Behavior of Fe3O4/Ag Nanocomposites Synthesized by Microwave Method [Volume 9, Issue 34, 2020, Pages 2462-2473]
-
FE-SEM
The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013-2014, Pages 395-402]
-
Fiber production
Production of polyester fibers with high thermal properties using Muscovite nanoparticles [Volume 11, Issue 41, 2023, Pages 3124-3133]
-
Field Emission Scanning Electron Microscope(FE-SEM)
The Study of Corrosion Resistance Behavior of Epoxy Nano Composite on Modified Steel using Conversion Coating Based on Hexa fluorozirconic Acid [Volume 2, Issue 7, 2013-2014, Pages 480-489]
-
Field Emission Scanning Electron Microscopy (FE-SEM)
Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel [Volume 4, Issue 14, 2015-2016, Pages 965-974]
-
Finite element method
Failure mechanisms and their finite element modeling of air plasma spray thermal barrier coatings: A review [Volume 7, Issue 27, 2018-2019, Pages 1937-1953]
-
Finite element method
Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
-
Flame Retardancy
Flame-Retardant Advanced Materials based on Binary and Ternary Polymer Blends: Morphology, Thermal Stability and Flame Retardancy [Volume 11, Issue 44, 2023, Pages 3144-3152]
-
Flame retardant
Improving thermal, flame retardant and mechanical properties of epoxy resin via expandable graphite [Volume 2, Issue 6, 2013-2014, Pages 410-419]
-
Flourosilane
preparation and characterixation of perflourosilane treated nanosilica and investigation of effect of pH in treatment process [Volume 1, Issue 4, 2012-2013, Pages 253-264]
-
Flourosilane
Evaluation of corrosion inhibition of some Azole compounds on Austenitic stainless steel exposed to HCl [Volume 1, Issue 4, 2012-2013, Pages 265-274]
-
Flow behavior index
Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensions [Volume 7, Issue 26, 2018-2019, Pages 1851-1857]
-
Fluorescent indicator
Synthesis of redox- responsive polyaniline microcapsules containing 8-hydroxyquinoline for corrosion protection of coatings. [Volume 9, Issue 34, 2020, Pages 2502-2511]
-
Fluorescent materials
A review on synthesis, properties and application of advanced naphthalimide dyes [Volume 1, Issue 2, 2012-2013, Pages 13-30]
-
Fluorocarbon
The effect of synthetic silica particles, urethane resin and Fluorocarbon on the water/oil repellency of cotton [Volume 7, Issue 25, 2018-2019, Pages 1815-1823]
-
Formaldehyde
Synthesis and characterization of modified resorcinol formaldehyde aerogel as a novel absorbent to removing oxytetracycline from aqueuos solution [Volume 10, Issue 38, 2021, Pages 2848-2861]
-
Forstrite
photo luminescent properties of Mg2SiO4:Dy3+ synthesized by hydrothermal method [Volume 1, Issue 4, 2012-2013, Pages 297-304]
-
Friction coefficient
Effect of carbon nanotubes concentration on wear resistance of nickel-boron-carbon nanotubes coatings [Volume 7, Issue 27, 2018-2019, Pages 1917-1924]
-
FTIR
Investigation of the magnetic and structural properties of Zinc cobalt ferrite nanoparticles CoxZn1-xFe2O4 synthesized by thermal process [Volume 5, Issue 19, 2016-2017, Pages 1389-1397]
-
FTIR
Deposition of aminopropyl trimethoxy silane on galvanized steel to improve corrosion resistance [Volume 3, Issue 11, 2014-2015, Pages 727-732]
-
Fuel Cell
Investigation of Morphology, Electrical and Electrochemical Properties of Gold Coating on Metallic Bipolar Plates of Fuel Cells [Volume 8, Issue 32, 2019-2020, Pages 2334-2335]
G
-
Gas Sensor
Design and manufacture multi nano biosensor for simultaneous detection of Carbon Dioxide, Methane, Ethanol and Ammonia gases [Volume 7, Issue 25, 2018-2019, Pages 1799-1808]
-
Gas Transmission Pipeline
Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines [Volume 10, Issue 38, 2021, Pages 2780-2791]
-
Gas tungsten arc welding
Formation of Composite Layer Containing Silicon Carbide particles on the A106 Steel Surface by Tungsten Inert Gas (TIG) [Volume 4, Issue 14, 2015-2016, Pages 1005-1014]
-
GC/Mass
Study on the effect of photocatalytic benzene elimination reaction on the tensile strength of water-based acrylic paint [Volume 4, Issue 15, 2015-2016, Pages 1059-1068]
-
Gelatin
Synthesis of gold Nanoparticles: Influence of reducing agent on optical properties [Volume 12, Issue 45, 2023, Pages 36-44]
-
Gelatin / Carboxymethylcellulose hydrogel
Gelatin / Sodium Carboxymethylcellulose Hydrogel Microcapsules for Maximum Release of Lidocaine Hydrochloride [Volume 10, Issue 40, 2021, Pages 2952-2965]
-
Glass Beads
To what extent glass beads are important in road markings [Volume 10, Issue 37, 2021, Pages 2748-2756]
-
Gloss
Evaluation of anticratering agent based on Epoxy-Aminopropyltriethoxy silane-diethanol
amine for cathodic electrocoating [Volume 3, Issue 11, 2014-2015, Pages 787-795]
-
GO
Design and manufacture multi nano biosensor for simultaneous detection of Carbon Dioxide, Methane, Ethanol and Ammonia gases [Volume 7, Issue 25, 2018-2019, Pages 1799-1808]
-
Gold Nanoparticles
Synthesis and characterization of gold–silica core-shell nanoparticles [Volume 10, Issue 38, 2021, Pages 2838-2846]
-
Gold Nanoparticles
Synthesis of gold Nanoparticles: Influence of reducing agent on optical properties [Volume 12, Issue 45, 2023, Pages 36-44]
-
Graft copolymer
Synthesis of hydrogel nanocomposite based on graft copolymer of chitosan / itaconic acid and metal nanoparticles [Volume 10, Issue 38, 2021, Pages 2772-2779]
-
Graphene nanoplatelets
Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fiber
I. Isothermal crystallization kinetics [Volume 7, Issue 28, 2018-2019, Pages 2022-2035]
-
Graphene nanoplatelets
Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fibers
II. Non-isothermal crystallization kinetics [Volume 8, Issue 30, 2019-2020, Pages 2152-2165]
-
Graphite
Electrochemical investigation of SEI layer in the formation process of natural graphite anode in Li-ion battery [Volume 7, Issue 26, 2018-2019, Pages 1825-1832]
-
Graphite
Synthesis and Electrical Conductivity Evaluation of Cross-linked Starch-Nanoclay Montmorillonite/Graphene Nanocomposite [Volume 9, Issue 34, 2020, Pages 2512-2518]
-
Green synthesis
Synthesis of diaryloxindoles using a novel protic ionic liquid based on triazole [Volume 12, Issue 45, 2023, Pages 24-34]
-
Growth Kinetic
Growth kinetic study of amorphous carbon thin film deposited by Ion Beam Sputtering deposition (IBSD) method using Avrami's model [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Growth time
Investigation of Effective parameters on the Density of Vertically-Aligned Carbon Nanotubes Synthesized by CVD Method [Volume 2, Issue 7, 2013-2014, Pages 463-473]
-
GTAW
Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW process [Volume 8, Issue 29, 2019-2020, Pages 2048-2059]
H
-
Halogen
Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2016-2017, Pages 1363-1370]
-
Hardness
Investigation of wear, hardness, microstructure properties and corrosion resistance
of coated st52 steel by WC-Ni particles produced by tungsten -gas
arc welding process [Volume 6, Issue 21, 2017-2018, Pages 1475-1488]
-
Hardness
Investigation the Effect of Voltage on the Microstructure and Corrosion Behavior of 5083 Aluminum Alloy Anodizing Coating [Volume 10, Issue 37, 2021, Pages 2718-2729]
-
HbA1c
A novel nano multi MIP sensor for simultaneous detection of cTnT & HbA1c [Volume 8, Issue 30, 2019-2020, Pages 2200-2210]
-
Heat treatement
Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2016-2017, Pages 1363-1370]
-
Hematite
Preparation of tungsten-modified hematite-based photoconductors for photoelectrochemical cathodic protection of stainless steel [Volume 9, Issue 34, 2020, Pages 2482-2489]
-
Hematite
Synthesis and investigation of the effect of precursor on hematite morphology using chemical vapor deposition layer for photoelectrochemical applications [Volume 10, Issue 39, 2021, Pages 2924-2933]
-
Hemostasis
Fabrication and characterization of hemostatic wound dressing based on chitosan/tannic acid/zeolitic imidazole framework (ZIF-8) composite nanofibers [Volume 10, Issue 38, 2021, Pages 2806-2815]
-
Hexafluorozirconic acid
The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013-2014, Pages 395-402]
-
Hexafluorozirconic acid
The Study of Corrosion Resistance Behavior of Epoxy Nano Composite on Modified Steel using Conversion Coating Based on Hexa fluorozirconic Acid [Volume 2, Issue 7, 2013-2014, Pages 480-489]
-
High-energy milling
Investigation of mechanical surface coatings by nickel, copper and silica nanoparticles on internal walls of low diameter pipes [Volume 5, Issue 18, 2016-2017, Pages 1259-1266]
-
High entropy alloys
Synthesis of high entropy alloy FeCoNiCuAl and investigation of enthalpy effect in phase separation [Volume 11, Issue 44, 2023, Pages 3220-3233]
-
HP/HVOF process
Characterization of WC-%XCo-%XCr coatings applied on stainless steel 316 by HP/HVOF and investigation the behavior of the coating in molten zinc bath [Volume 7, Issue 28, 2018-2019, Pages 2010-2020]
-
Huggins constant
Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensions [Volume 7, Issue 26, 2018-2019, Pages 1851-1857]
-
Human Serum Albumin
Evaluating the effect of albumin protein coating on corona composition of single walled carbon nanotubes [Volume 8, Issue 29, 2019-2020, Pages 2060-2071]
-
HVOF
Effect of NiAl- (Cr2O3, TiO2) composite coating on oxidation resistance of HH heat resistant steel [Volume 7, Issue 27, 2018-2019, Pages 1909-1915]
-
Hybrid
Evaluation of simultaneous presence of epoxy and polyester resins containing silica nanoparticles in the structure of foodstuff can coatings [Volume 10, Issue 39, 2021, Pages 2882-2897]
-
Hydrogel
Properties and applications of hydrogels in medicine: A review [Volume 8, Issue 29, 2019-2020, Pages 2116-2128]
-
Hydrogel
Synthesis of hydrogel nanocomposite based on graft copolymer of chitosan / itaconic acid and metal nanoparticles [Volume 10, Issue 38, 2021, Pages 2772-2779]
-
Hydrogen cathode
Nano-Composite Coating of Ni+RuO2 by Co-Electrodeposition
Part II: Morphology, RuO2 paricle size distribution and substrate pretreatment [Volume 1, Issue 3, 2012-2013, Pages 177-184]
-
Hydrogen evolution cathode
Nano-Composite Coating of Ni+RuO2 by Co-Elctrodeposition
Part I : Preparation, Electrochemical Properties and Stability [Volume 1, Issue 2, 2012-2013, Pages 49-60]
-
Hydrogen Sulfide
Enhanced hydrogen sulfide adsorption of polyurethane nanofibrous membranes using carbon nanotubes decorated with metal oxide nanoparticles [Volume 8, Issue 30, 2019-2020, Pages 2130-2138]
-
Hydrolysis
Synthesis of Porous Zirconium-based Metal-Organic Framework Nanostructure for Detoxification of Chemical Pollutants [Volume 9, Issue 34, 2020, Pages 2452-2460]
-
Hydrophilicity
Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2016-2017, Pages 1429-1437]
-
Hydrophobic
preparation and characterixation of perflourosilane treated nanosilica and investigation of effect of pH in treatment process [Volume 1, Issue 4, 2012-2013, Pages 253-264]
-
Hydrophobic
Evaluation of corrosion inhibition of some Azole compounds on Austenitic stainless steel exposed to HCl [Volume 1, Issue 4, 2012-2013, Pages 265-274]
-
Hydrophobicity
Modification of PES Polymeric Membrane by Oleic Acid for Membrane Distillation Process [Volume 8, Issue 31, 2019-2020, Pages 2228-2238]
-
Hydrophobicity
Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines [Volume 10, Issue 38, 2021, Pages 2780-2791]
-
Hydrothermal
photo luminescent properties of Mg2SiO4:Dy3+ synthesized by hydrothermal method [Volume 1, Issue 4, 2012-2013, Pages 297-304]
-
Hydrothermal
Comparison of Magnetic, Optical and Morphological Properties of the Nanocomposite of Reduced Graphene Oxide Coated with Zinc Ferrite Synthesized by One-Step Hydrothermal and Two-Step Sol-Gel / Hydrothermal Methods [Volume 9, Issue 33, 2020, Pages 2424-2433]
-
Hydrothermal
Preparation of One-dimensional Reduced Titanium Dioxide; A Candidate for photocatalytic Applications [Volume 10, Issue 39, 2021, Pages 2872-2880]
-
Hydroxyapatite
Plasma sprayed nano-hydroxyapatite coatings on titanium alloys [Volume 5, Issue 20, 2016-2017, Pages 1407-1413]
-
Hydroxyapatite
Theoretical Evaluation of Hydroxyapatite: The Effect of Structural Modification on Mechanical Properties [Volume 6, Issue 24, 2017-2018, Pages 1755-1761]
-
Hydroxyapatite
The Role of zirconium additive in modifying Hydroxyapatite-based coating to increase the anti-corrosion performance for Mg implant applications [Volume 10, Issue 40, 2021, Pages 3018-3031]
I
-
IAST
Application of Ideal Adsorption Solution Theory (IAST) for Investigation of Separation of Carbon Dioxide / Nitrogen Gases on Nitrogen-doped Porous Carbon Synthesized from Nano-polyaniline [Volume 8, Issue 32, 2019-2020, Pages 2288-2300]
-
Impact angle
Prediction of Nano-Droplet Spreading on the Surface using the Multivariate Non-Linear Regression [Volume 7, Issue 26, 2018-2019, Pages 1881-1886]
-
Implant
The Role of zirconium additive in modifying Hydroxyapatite-based coating to increase the anti-corrosion performance for Mg implant applications [Volume 10, Issue 40, 2021, Pages 3018-3031]
-
Incubator
Viscosity stabilization of Nano-Composites of PVC Plastisol in underbody coating on (PVC/Closite-30B/ZnO) [Volume 5, Issue 19, 2016-2017, Pages 1381-1388]
-
IndigoØ› Dye-sensitized solar cellØ› anti-aggregation agentØ› conversion efficiency
Study on photovoltaic properties of dye-sensitized solar cells based on indigo dyes in the presence of an anti-aggregation agent [Volume 4, Issue 16, 2015-2016, Pages 1105-1110]
-
Indigo Extraction
Optimization of Dye Extraction from Indigofera tinctoria & Dyeing Quality Evaluation [Volume 8, Issue 32, 2019-2020, Pages 2320-2332]
-
Indigofera tinctoria
Optimization of Dye Extraction from Indigofera tinctoria & Dyeing Quality Evaluation [Volume 8, Issue 32, 2019-2020, Pages 2320-2332]
-
Ink
Studying the effects of Rheological additives on the Rheological Properties of Offset Inks [Volume 4, Issue 14, 2015-2016, Pages 999-1004]
-
Inkjet Printing
Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016-2017, Pages 1215-1222]
-
Inorganic filler
Theoretical Evaluation of Hydroxyapatite: The Effect of Structural Modification on Mechanical Properties [Volume 6, Issue 24, 2017-2018, Pages 1755-1761]
-
In situ Emulsion polymerization
Production of Electrophotographic Toner using in stiu Emulsion Copolymerization of Styrene-Butyl acrylate [Volume 9, Issue 36, 2020, Pages 2678-2688]
-
In situ polymerization
Synthesis of Polymethylmetacrylate Containing of Silica Nanoparticles by Suspended in-situ Polymerization Used in Coating Industry [Volume 5, Issue 17, 2016-2017, Pages 1187-1194]
-
In situ polymerization
Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion
Resistance Epoxy Coating [Volume 5, Issue 19, 2016-2017, Pages 1353-1361]
-
Intelligent molecule
Synthesis and investigation of photochoromic behavior of bicyclic aziridine based on calix pyrrole as an intelligent molecule [Volume 1, Issue 2, 2012-2013, Pages 41-48]
-
Interpenetrating polymer network
Synthesis and investigation of dynamic-mechanical properties of polystyrene, poly methyl methacrylate and poly buthyl acrylate IPNs with core/shell morphology [Volume 9, Issue 35, 2020, Pages 2602-2611]
-
Interpore Distance
Investigation of effective parameters in the formation of nanoporous and
regular anodized aluminum oxide structures [Volume 6, Issue 21, 2017-2018, Pages 1531-1541]
-
Invar
Influences of Inorganic Coatings on Corrosion Resistance of Invar Alloy [Volume 4, Issue 14, 2015-2016, Pages 991-998]
-
Ion beam sputtering deposition
Growth kinetic study of amorphous carbon thin film deposited by Ion Beam Sputtering deposition (IBSD) method using Avrami's model [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Ionic Bond
Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016-2017, Pages 1215-1222]
-
Ionic Conductivity
Molecular dynamics simulation of the effect of size, crystallite shape, and defect on oxygen diffusion in SrTiO3 [Volume 7, Issue 26, 2018-2019, Pages 1843-1850]
-
Ionic Liquid
Physical and Dyeing Properties of ellulosic fabric dyed by C.I. reactive dye Red 128 in the presence of Imidazoline Hydrochloride as an ionic liquid [Volume 5, Issue 17, 2016-2017, Pages 1195-1204]
-
IPN
Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks [Volume 6, Issue 23, 2017-2018, Pages 1627-1634]
-
IPN
Optimization of nano clay content on in-situ polymerization of polyurethane/polymethyl methacrylate interpenetrating network to study acoustic, thermal and mechanical properties of nanocomposites [Volume 6, Issue 24, 2017-2018, Pages 1747-1754]
-
Isothermal crystallization
Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fiber
I. Isothermal crystallization kinetics [Volume 7, Issue 28, 2018-2019, Pages 2022-2035]
-
ITO Nanoparticles
Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2015-2016, Pages 1119-1128]
K
-
Ketoaziridine
Synthesis and investigation of photochoromic behavior of bicyclic aziridine based on calix pyrrole as an intelligent molecule [Volume 1, Issue 2, 2012-2013, Pages 41-48]
-
Kinetic roughening
Study of photocatalytic properties of electrodeposited silver and zinc oxide thin films [Volume 10, Issue 37, 2021, Pages 2730-2738]
-
Kinetics
Kinetic study of ß-carotene degradation in nanostructured lipid carriers [Volume 8, Issue 29, 2019-2020, Pages 2108-2115]
L
-
Lanthanum Nitrate
Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel [Volume 4, Issue 14, 2015-2016, Pages 965-974]
-
Latex
Synthesis and investigation of dynamic-mechanical properties of polystyrene, poly methyl methacrylate and poly buthyl acrylate IPNs with core/shell morphology [Volume 9, Issue 35, 2020, Pages 2602-2611]
-
Layered Silicate
Evaluation of the anti-corrosion effect of clay based nanopigments modified with organic azole compounds [Volume 6, Issue 23, 2017-2018, Pages 1641-1654]
-
Lead-free piezoelectrics
Potassium Sodium Niobate Lead-free Piezoelectric Ceramics: Difficulties inthe Processing and the Advantages of Iran: The Case of Iran and Slovenia [Volume 4, Issue 16, 2015-2016, Pages 1148-1158]
-
Lidocaine hydrochloride
Gelatin / Sodium Carboxymethylcellulose Hydrogel Microcapsules for Maximum Release of Lidocaine Hydrochloride [Volume 10, Issue 40, 2021, Pages 2952-2965]
-
Lightness
Investigation on Synthesis and Applied Properties of Cellulose Acetate Butyrate Polymers (CAB) [Volume 9, Issue 33, 2020, Pages 2392-2399]
-
Li-ion battery
Electrochemical investigation of SEI layer in the formation process of natural graphite anode in Li-ion battery [Volume 7, Issue 26, 2018-2019, Pages 1825-1832]
-
Linter
Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2014-2015, Pages 861-872]
-
Lithium Ion
Synthesis and Characterization of a Cellulose Acetate Based PIM for Water Treatment [Volume 6, Issue 22, 2017-2018, Pages 1619-1626]
-
Luminescent
The use of a fluorescent dye in the dyeing of wool fibers in carpet Naphthalimide [Volume 5, Issue 17, 2016-2017, Pages 1243-1250]
M
-
Magnesium
Investigation of mechanochemical reduction of CrO3-V2O5-Mg-C composite system [Volume 7, Issue 28, 2018-2019, Pages 1964-1973]
-
Magnesium
Fabrication of three-layer graded magnesium foam by means powder metallurgy and spacer method with an application in bioimplants: macro morphology, microstructure and compressive properties evaluation [Volume 11, Issue 44, 2023, Pages 3170-3181]
-
Magnesium alloy
Microstructural, Electrochemical and Biocompatibility Investigation of TiO2 Coating on AZ91D by magnetron sputtering method [Volume 8, Issue 31, 2019-2020, Pages 2248-2257]
-
Magnesium Alloy AZ31
Studying the anti-corrosive properties of a polyurethane coating on the AZ31 magnesium alloy via surface chemical modification by nano-conversion coatings based on praseodymium [Volume 6, Issue 24, 2017-2018, Pages 1719-1726]
-
Magnesium and Zinc Aluminate
A Review to the Effects of Cations Replacement on the Properties of Combined
Spinels Based on Cobalt, Zinc and Magnesium [Volume 6, Issue 21, 2017-2018, Pages 1489-1505]
-
Magnesium oxide nanoparticle
The Effect of Inorganic Nanoparticles on Diffuse Reflectance Behavior of the Printed Cotton/Nylon Blend Fabric in Near Infrared and Short-Wave Infrared Spectral Ranges [Volume 8, Issue 30, 2019-2020, Pages 2188-2198]
-
Magnetic
Synthesis and characterization of reduced graphene oxide with magnetized polyaniline for electromagnetic shielding [Volume 12, Issue 45, 2023, Pages 46-56]
-
Magnetic metal-organic framework
Investigation of the properties and applications of magnetic metal-organic framework (MMOF) composites for detection and removal of environmental pollutants [Volume 9, Issue 35, 2020, Pages 2546-2572]
-
Magnetic properties
The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Method [Volume 7, Issue 26, 2018-2019, Pages 1859-1869]
-
Magnetite
The effects of surfactant concentration on the properties of magnetite nanoparticles used in the production of electrophotography toner via emulsion aggregation method [Volume 2, Issue 6, 2013-2014, Pages 394-387]
-
Magnetron sputtering
Synthesis and Evaluation of Tungsten, Tungsten nitride and Tungsten oxide films Prepared in a Magnetron Sputtering System [Volume 1, Issue 2, 2012-2013, Pages 31-40]
-
Magnetron sputtering
Microstructural, Electrochemical and Biocompatibility Investigation of TiO2 Coating on AZ91D by magnetron sputtering method [Volume 8, Issue 31, 2019-2020, Pages 2248-2257]
-
Marine Structural Element
Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
-
Max
Properties of MXene and its synthesis methods [Volume 12, Issue 45, 2023, Pages 1-22]
-
Mean diameter of nanoparticles
The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Method [Volume 7, Issue 26, 2018-2019, Pages 1859-1869]
-
Mechanical properties
Mechanism of particle formation, morphology and mechanical properties of
hybrid and pure PMMA latexes prepared via Pickering and surfactant-free
emulsion polymerization [Volume 4, Issue 15, 2015-2016, Pages 1087-1096]
-
Mechanical properties
Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating [Volume 3, Issue 11, 2014-2015, Pages 733-741]
-
Mechanical properties
Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks [Volume 6, Issue 23, 2017-2018, Pages 1627-1634]
-
Mechanical properties
Physical, Mechanical and Thermal Properties of Epoxy Coatings Modified with Nitrile-Butadiene Nano-rubber [Volume 7, Issue 28, 2018-2019, Pages 2036-2047]
-
Mechanical properties
Optimization of nano clay content on in-situ polymerization of polyurethane/polymethyl methacrylate interpenetrating network to study acoustic, thermal and mechanical properties of nanocomposites [Volume 6, Issue 24, 2017-2018, Pages 1747-1754]
-
Mechanical properties
Theoretical Evaluation of Hydroxyapatite: The Effect of Structural Modification on Mechanical Properties [Volume 6, Issue 24, 2017-2018, Pages 1755-1761]
-
Mechanism
Impact strength increasing and toughening mechanism of epoxy resin [Volume 3, Issue 12, 2014-2015, Pages 873-884]
-
Mechanochemical process
Investigation of mechanochemical reduction of CrO3-V2O5-Mg-C composite system [Volume 7, Issue 28, 2018-2019, Pages 1964-1973]
-
Membrane distillation process
Modification of PES Polymeric Membrane by Oleic Acid for Membrane Distillation Process [Volume 8, Issue 31, 2019-2020, Pages 2228-2238]
-
Membrane separation
Synthesis and Characterization of a Cellulose Acetate Based PIM for Water Treatment [Volume 6, Issue 22, 2017-2018, Pages 1619-1626]
-
Mercaptoethanol
Synthesis and investigation of band energy variations in Pbs nanocrystallites via optical route [Volume 2, Issue 6, 2013-2014, Pages 403-409]
-
Metallic bipolar plate
Investigation of Morphology, Electrical and Electrochemical Properties of Gold Coating on Metallic Bipolar Plates of Fuel Cells [Volume 8, Issue 32, 2019-2020, Pages 2334-2335]
-
Metallic Organic Frameworks
Synthesis of leather fatliquoring agent with using castor oil/metallic organic
frameworks (MOFs) via Pickering emulsion polymerization [Volume 6, Issue 21, 2017-2018, Pages 1543-1549]
-
Metal-organic framework
Synthesis of Porous Zirconium-based Metal-Organic Framework Nanostructure for Detoxification of Chemical Pollutants [Volume 9, Issue 34, 2020, Pages 2452-2460]
-
Metal-organic framework
Fabrication and characterization of hemostatic wound dressing based on chitosan/tannic acid/zeolitic imidazole framework (ZIF-8) composite nanofibers [Volume 10, Issue 38, 2021, Pages 2806-2815]
-
Metal-organic framework
Studying the UV protection of the cotton fabric coated with MOF-derived C@ZnO and photocatalytic activity of synthesized nanoparticles [Volume 11, Issue 44, 2023, Pages 3196-3204]
-
Metal-organic Frameworks
Air pollution remediation using nanofibrous filters based on metal-organic frameworks (MOFs) prepared through electrospinning [Volume 10, Issue 37, 2021, Pages 2690-2704]
-
Metal-Organic Frameworks (MOF)
Synthesis and Characterization of Fe-Based Metal-Organic Frameworks:
MIL53 (Fe) for Methylene Blue Degradation [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Meta-phenylenediamine
Synthesis and characterization of modified resorcinol formaldehyde aerogel as a novel absorbent to removing oxytetracycline from aqueuos solution [Volume 10, Issue 38, 2021, Pages 2848-2861]
-
Methylene &ndash
Synthesis and Characterization of Fe-Based Metal-Organic Frameworks:
MIL53 (Fe) for Methylene Blue Degradation [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Micro arc oxidation
Effect of Surface Nanocrystalization on the Properties of Micro Arc Oxidation Coating on Aluminum [Volume 5, Issue 18, 2016-2017, Pages 1267-1277]
-
Microcapsule
Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion
Resistance Epoxy Coating [Volume 5, Issue 19, 2016-2017, Pages 1353-1361]
-
Microcapsule
Gelatin / Sodium Carboxymethylcellulose Hydrogel Microcapsules for Maximum Release of Lidocaine Hydrochloride [Volume 10, Issue 40, 2021, Pages 2952-2965]
-
Micro lignin
Extracting and investigating the accuracy of granulation and molecular weight of lignin based biological polyols for the production of polyurethane coating [Volume 11, Issue 44, 2023, Pages 3206-3218]
-
Micro-phase separation
Study of the Sound Absorption Behavior and Cell walls Roughness of Flexible Polyurethane Foams [Volume 6, Issue 24, 2017-2018, Pages 1733-1739]
-
Micro platelet particles
Fabrication of Polymeric Micro-Platelets via Electro-Centrifuge Spinning [Volume 6, Issue 21, 2017-2018, Pages 1515-1524]
-
Microstructure
Investigation of mechanical surface coatings by nickel, copper and silica nanoparticles on internal walls of low diameter pipes [Volume 5, Issue 18, 2016-2017, Pages 1259-1266]
-
Microstructure
Synthesis and Evaluation of Tungsten, Tungsten nitride and Tungsten oxide films Prepared in a Magnetron Sputtering System [Volume 1, Issue 2, 2012-2013, Pages 31-40]
-
Microstructure
Combination of weld cladding and Carburization treatment to Reconstruction of Industrial Parts of DIN-25CrMo4 Steel [Volume 7, Issue 25, 2018-2019, Pages 1809-1814]
-
Microwave
Microwave-assisted Sintering of BaFe0.8Cu0.1Ni0.1O3-δ Composition for Use as Solid Oxide Fuel Cell Cathode [Volume 5, Issue 19, 2016-2017, Pages 1347-1352]
-
Microwave absorber
Preparation and characterization of polyaniline-cobalt ferrite nanocomposite applicable as a microwave absorber coating [Volume 5, Issue 18, 2016-2017, Pages 1313-1320]
-
Microwave sintering
Comparison between the effects of microwave and conventional sintering
on the microstructure and mechanical properties of metal-base Al-WC
composites [Volume 4, Issue 15, 2015-2016, Pages 1081-1086]
-
Migration Test
Evaluation of simultaneous presence of epoxy and polyester resins containing silica nanoparticles in the structure of foodstuff can coatings [Volume 10, Issue 39, 2021, Pages 2882-2897]
-
MIL-53 (Fe)
Synthesis and Characterization of Fe-Based Metal-Organic Frameworks:
MIL53 (Fe) for Methylene Blue Degradation [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Mineral resin
Study of resistance of applied mineral resin coating for stabilization of nanoparticles TiO2 to remove organic pollutants from waste water of paint and coating industries [Volume 6, Issue 24, 2017-2018, Pages 1741-1746]
-
Mini-emulsion
Synthesis of redox- responsive polyaniline microcapsules containing 8-hydroxyquinoline for corrosion protection of coatings. [Volume 9, Issue 34, 2020, Pages 2502-2511]
-
Modeling
Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process [Volume 3, Issue 12, 2014-2015, Pages 799-808]
-
Moisture
Potassium Sodium Niobate Lead-free Piezoelectric Ceramics: Difficulties inthe Processing and the Advantages of Iran: The Case of Iran and Slovenia [Volume 4, Issue 16, 2015-2016, Pages 1148-1158]
-
Molecular dynamic
Molecular dynamics simulation of the effect of size, crystallite shape, and defect on oxygen diffusion in SrTiO3 [Volume 7, Issue 26, 2018-2019, Pages 1843-1850]
-
Molecular Dynamics
Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth [Volume 6, Issue 23, 2017-2018, Pages 1635-1640]
-
Multi-component reaction
Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2021, Pages 2292-3002]
-
Multilayer core/shell
Synthesis and investigation of dynamic-mechanical properties of polystyrene, poly methyl methacrylate and poly buthyl acrylate IPNs with core/shell morphology [Volume 9, Issue 35, 2020, Pages 2602-2611]
-
Multi-Nanobiosensor
Design and manufacture multi nano biosensor for simultaneous detection of Carbon Dioxide, Methane, Ethanol and Ammonia gases [Volume 7, Issue 25, 2018-2019, Pages 1799-1808]
-
Multiple jets
Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process [Volume 3, Issue 12, 2014-2015, Pages 799-808]
-
Multivariate Regression
Prediction of Nano-Droplet Spreading on the Surface using the Multivariate Non-Linear Regression [Volume 7, Issue 26, 2018-2019, Pages 1881-1886]
-
Multi walled carbon nanotubes (MWCNTs)
Surface modification of silk fibers by activated carbon nanotubes [Volume 7, Issue 25, 2018-2019, Pages 1763-1772]
-
Muscovite
Investigating physical and comfort properties of cotton and polyester fabrics coated with muscovite mineral particles [Volume 11, Issue 41, 2023, Pages 3072-3083]
-
Muscovite nanoparticles
Production of polyester fibers with high thermal properties using Muscovite nanoparticles [Volume 11, Issue 41, 2023, Pages 3124-3133]
-
MXene
An overview of the methods of synthesis, characterization and applications of MXene as a Microwave absorber [Volume 11, Issue 41, 2023, Pages 3048-3071]
-
MXene
Properties of MXene and its synthesis methods [Volume 12, Issue 45, 2023, Pages 1-22]
N
-
Nano alumina
Effect of current density on microstructure and corrosion behavior of Co-P-nano-Al2O3 composite coating [Volume 8, Issue 31, 2019-2020, Pages 2258-2268]
-
Nanoceramic
Effects of Temperature on Corrosion Resistance of NanoZirconia-Based Conversion Coating [Volume 3, Issue 12, 2014-2015, Pages 831-840]
-
Nano Clay
Studying the corrosion resistance of an epoxy clay nanocoating using salt spray test and electrochemical impedance spectroscopy [Volume 1, Issue 2, 2012-2013, Pages 3-12]
-
Nano Clay
Optimization of nano clay content on in-situ polymerization of polyurethane/polymethyl methacrylate interpenetrating network to study acoustic, thermal and mechanical properties of nanocomposites [Volume 6, Issue 24, 2017-2018, Pages 1747-1754]
-
Nanocomposite
Improvement of Corrosion Resistance of Aluminum by Application of Alumina-Zirconia Nanocomposite Coating via Sol-Gel Method [Volume 4, Issue 16, 2015-2016, Pages 1111-1118]
-
Nanocomposite
Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2015-2016, Pages 1119-1128]
-
Nanocomposite
Prediction of elastic modulus of epoxy/single wall carbon nanotube composites by considering interfacial debonding [Volume 5, Issue 19, 2016-2017, Pages 1371-1379]
-
Nanocomposite
Viscosity stabilization of Nano-Composites of PVC Plastisol in underbody coating on (PVC/Closite-30B/ZnO) [Volume 5, Issue 19, 2016-2017, Pages 1381-1388]
-
Nanocomposite
Synthesizing of molecularly imprinted nanocomposites for using as diazinon
sensor [Volume 6, Issue 21, 2017-2018, Pages 1507-1514]
-
Nanocomposite
Functionalization and dispersion of graphene nano plates in resins [Volume 3, Issue 12, 2014-2015, Pages 809-830]
-
Nanocomposite
Preparation and characterization of polyaniline-cobalt ferrite nanocomposite applicable as a microwave absorber coating [Volume 5, Issue 18, 2016-2017, Pages 1313-1320]
-
Nanocomposite
The Study of Corrosion Resistance Behavior of Epoxy Nano Composite on Modified Steel using Conversion Coating Based on Hexa fluorozirconic Acid [Volume 2, Issue 7, 2013-2014, Pages 480-489]
-
Nanocomposite
Investigation of mechanochemical reduction of CrO3-V2O5-Mg-C composite system [Volume 7, Issue 28, 2018-2019, Pages 1964-1973]
-
Nanocomposite
Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fiber
I. Isothermal crystallization kinetics [Volume 7, Issue 28, 2018-2019, Pages 2022-2035]
-
Nanocomposite
Evaluation of Carbon Nano Webs produced by Needleless and Conventional Electro-spun PAN-MWCNT Nanofibers Precursor [Volume 8, Issue 31, 2019-2020, Pages 2212-2227]
-
Nanocomposite
Synthesis of Graphene- Poly Catechol Conductive Polymer Nanocomposite Production by Electropolymerization for use in electrochemical sensors [Volume 9, Issue 33, 2020, Pages 2380-2391]
-
Nanocomposite
Synthesis of hydrogel nanocomposite based on graft copolymer of chitosan / itaconic acid and metal nanoparticles [Volume 10, Issue 38, 2021, Pages 2772-2779]
-
Nanocomposite
Investigation of electrical, mechanical and thermal properties of silicone nanocomposites as electrical coating insulation [Volume 10, Issue 39, 2021, Pages 2934-2951]
-
Nanocomposite
Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
-
Nanocomposite barium/strontium hexaferrite
The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Method [Volume 7, Issue 26, 2018-2019, Pages 1859-1869]
-
Nanocomposite Coating
Evaluation of the anti-corrosion effect of clay based nanopigments modified with organic azole compounds [Volume 6, Issue 23, 2017-2018, Pages 1641-1654]
-
Nanocomposite Coating
Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines [Volume 10, Issue 38, 2021, Pages 2780-2791]
-
Nanocomposite particles
The assessment of photocatalytic properties of a synthesized TiO2/Ag nanocomposite particle loaded on polyester/cotton fabric via the discoloration of methylene blue [Volume 6, Issue 22, 2017-2018, Pages 1587-1596]
-
Nanocomposites
Effect of silicon carbide nanoparticles on the properties of polyurethane coatings applied on steel substrates [Volume 3, Issue 11, 2014-2015, Pages 743-751]
-
Nano-Constant
Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir [Volume 5, Issue 20, 2016-2017, Pages 1421-1428]
-
Nanocrystalization
Effect of Surface Nanocrystalization on the Properties of Micro Arc Oxidation Coating on Aluminum [Volume 5, Issue 18, 2016-2017, Pages 1267-1277]
-
Nanofiber
Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method [Volume 10, Issue 40, 2021, Pages 2978-2990]
-
Nanofibers
Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process [Volume 3, Issue 12, 2014-2015, Pages 799-808]
-
Nanofibers
Synthesis and Characterization of Polyacrylamideoxime and Its Nanofibers as Self-Decontamination Coatings [Volume 4, Issue 14, 2015-2016, Pages 1015-1022]
-
Nanofibers
Improving sound absorption behavior of flexible polyurethane foams infused with polymer nanofibers, carbon nanotubes and nanoparticles [Volume 8, Issue 29, 2019-2020, Pages 2072-2080]
-
Nanofibers
Enhanced hydrogen sulfide adsorption of polyurethane nanofibrous membranes using carbon nanotubes decorated with metal oxide nanoparticles [Volume 8, Issue 30, 2019-2020, Pages 2130-2138]
-
Nanofibers
Improving waterproof and breathability of nanofibrous polyurethane-poly(vinylidene fluoride) hybrid membrane [Volume 9, Issue 36, 2020, Pages 2622-2630]
-
Nanofibers Cellulose
Optimization of toughening of Polylactic Acid Nanocomposites/ Nanofibrillated Cellulose [Volume 7, Issue 25, 2018-2019, Pages 1789-1798]
-
Nanofibrous electrospun substrate
Production of Conductive Biocompatible Nanofibrous Substrate made of PLGA/PCL/PANI [Volume 6, Issue 22, 2017-2018, Pages 1597-1603]
-
Nanofibrous scaffold
Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2016-2017, Pages 1429-1437]
-
Nano Gama alumina
Surface treatment of nanoalumina with aminosilane: the effect of silane concentration on the surface chemistry and performance of nanoalumina [Volume 4, Issue 16, 2015-2016, Pages 1129-1146]
-
Nano NBR
Physical, Mechanical and Thermal Properties of Epoxy Coatings Modified with Nitrile-Butadiene Nano-rubber [Volume 7, Issue 28, 2018-2019, Pages 2036-2047]
-
Nanoparticle
Preparation and characterization of polyaniline-cobalt ferrite nanocomposite applicable as a microwave absorber coating [Volume 5, Issue 18, 2016-2017, Pages 1313-1320]
-
Nanoparticle
Investigation of electrical, mechanical and thermal properties of silicone nanocomposites as electrical coating insulation [Volume 10, Issue 39, 2021, Pages 2934-2951]
-
Nano-particles
Novel protective coatings based on silane [Volume 1, Issue 3, 2012-2013, Pages 193-204]
-
Nanoparticles
A Review to the Effects of Cations Replacement on the Properties of Combined
Spinels Based on Cobalt, Zinc and Magnesium [Volume 6, Issue 21, 2017-2018, Pages 1489-1505]
-
Nanoparticles
photo luminescent properties of Mg2SiO4:Dy3+ synthesized by hydrothermal method [Volume 1, Issue 4, 2012-2013, Pages 297-304]
-
Nanoparticles
Improving sound absorption behavior of flexible polyurethane foams infused with polymer nanofibers, carbon nanotubes and nanoparticles [Volume 8, Issue 29, 2019-2020, Pages 2072-2080]
-
Nano photo-catalyst
The Study of Nanostructure, Magnetic Properties and Photocatalytic Behavior of Fe3O4/Ag Nanocomposites Synthesized by Microwave Method [Volume 9, Issue 34, 2020, Pages 2462-2473]
-
Nanophotocatalyst
Effect of Ag dopped group on the dye removal efficiency of TiO2-Ag and
ZnO-Ag nanophotocatalyst; a comparison study [Volume 4, Issue 15, 2015-2016, Pages 1071-1080]
-
Nanoporous Membrane
Investigation of effective parameters in the formation of nanoporous and
regular anodized aluminum oxide structures [Volume 6, Issue 21, 2017-2018, Pages 1531-1541]
-
Nano-sensors
Rapid and Easy Fabrication of Tryptophan Amino Acid Plasmonic Detection Kit [Volume 9, Issue 33, 2020, Pages 2370-2378]
-
Nanosheet
Effect of ZnO seed layer on the growth of CdS nanostructures for optoelectronic applications [Volume 9, Issue 35, 2020, Pages 2590-2600]
-
Nanosilica Modified Carbon Nanotube
Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines [Volume 10, Issue 38, 2021, Pages 2780-2791]
-
Nanostructred crystal
Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2016-2017, Pages 1363-1370]
-
Nanostructure
Comparison between the effects of microwave and conventional sintering
on the microstructure and mechanical properties of metal-base Al-WC
composites [Volume 4, Issue 15, 2015-2016, Pages 1081-1086]
-
Nanostructure
The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Method [Volume 7, Issue 26, 2018-2019, Pages 1859-1869]
-
Nanostructure
The Study of Nanostructure, Magnetic Properties and Photocatalytic Behavior of Fe3O4/Ag Nanocomposites Synthesized by Microwave Method [Volume 9, Issue 34, 2020, Pages 2462-2473]
-
Nanostructure
An overview of the methods of synthesis, characterization and applications of MXene as a Microwave absorber [Volume 11, Issue 41, 2023, Pages 3048-3071]
-
Nanostructured lipid carriers
Kinetic study of ß-carotene degradation in nanostructured lipid carriers [Volume 8, Issue 29, 2019-2020, Pages 2108-2115]
-
Nanostructures
Investigation of mechanical surface coatings by nickel, copper and silica nanoparticles on internal walls of low diameter pipes [Volume 5, Issue 18, 2016-2017, Pages 1259-1266]
-
Nano Substrate
Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir [Volume 5, Issue 20, 2016-2017, Pages 1421-1428]
-
Nanotechnology
Kinetic study of ß-carotene degradation in nanostructured lipid carriers [Volume 8, Issue 29, 2019-2020, Pages 2108-2115]
-
Nanotechnology
Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
-
Naphthalimide dye
The use of a fluorescent dye in the dyeing of wool fibers in carpet Naphthalimide [Volume 5, Issue 17, 2016-2017, Pages 1243-1250]
-
Naphthalimides
A review on synthesis, properties and application of advanced naphthalimide dyes [Volume 1, Issue 2, 2012-2013, Pages 13-30]
-
Natural dyeing
Optimization of Dye Extraction from Indigofera tinctoria & Dyeing Quality Evaluation [Volume 8, Issue 32, 2019-2020, Pages 2320-2332]
-
Natural dyes
Using of Artemesia Absinthinum, Verbascum Thapsus, Viola Odorata, Matricaria Chamomilla and Corianderum Satirum natural dyes in making dye-sensitized solar cells [Volume 8, Issue 32, 2019-2020, Pages 2346-2356]
-
Near-infrared reflective pigments
Synthesis and evaluation of ZnFe2-xAlxO4 spinel ferrite nanopigments with high NIR reflectance [Volume 6, Issue 22, 2017-2018, Pages 1559-1568]
-
Near-infrared reflective pigments
The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015-2016, Pages 975-982]
-
Near infrared region
The Effect of Inorganic Nanoparticles on Diffuse Reflectance Behavior of the Printed Cotton/Nylon Blend Fabric in Near Infrared and Short-Wave Infrared Spectral Ranges [Volume 8, Issue 30, 2019-2020, Pages 2188-2198]
-
Network polymer
Improvement of water vapor and oxygen permeability of poly lactic acid films using a network polymer synthesized from 2-acrylamido-2-methylpropanesulfonic acid [Volume 5, Issue 18, 2016-2017, Pages 1297-1302]
-
NiAL
Effect of NiAl- (Cr2O3, TiO2) composite coating on oxidation resistance of HH heat resistant steel [Volume 7, Issue 27, 2018-2019, Pages 1909-1915]
-
Ni-Co-CeO2-ZrO2 composite coating
Investigation of the high temperature corrosion behavior of AISI 304 steel coated with Ni-Co-CeO2-ZrO2 composite [Volume 11, Issue 41, 2023, Pages 3084-3094]
-
Ni–Cu solid solution
Investigation of mechanical surface coatings by nickel, copper and silica nanoparticles on internal walls of low diameter pipes [Volume 5, Issue 18, 2016-2017, Pages 1259-1266]
-
Nitrogen-doped porous carbons
Application of Ideal Adsorption Solution Theory (IAST) for Investigation of Separation of Carbon Dioxide / Nitrogen Gases on Nitrogen-doped Porous Carbon Synthesized from Nano-polyaniline [Volume 8, Issue 32, 2019-2020, Pages 2288-2300]
-
N-methyl morpholine N-oxide
PHMB and Nano Silver As Novel Agents for Producing Antibacterial RegeneratedFibers from Silk Wastage [Volume 4, Issue 15, 2015-2016, Pages 1051-1058]
-
Non-isothermal crystallization
Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fibers
II. Non-isothermal crystallization kinetics [Volume 8, Issue 30, 2019-2020, Pages 2152-2165]
-
Nozzle alignment
Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process [Volume 3, Issue 12, 2014-2015, Pages 799-808]
-
N-phenyl hydrazinocarbonyl acrylic acid
Synthesis of Nitro derivatives phenyl hydrazinocarbonyl acrylic acid and their use as corrosion inhibitor agent in temporary coatings [Volume 6, Issue 23, 2017-2018, Pages 1669-1679]
O
-
Offset printing
Studying the effects of Rheological additives on the Rheological Properties of Offset Inks [Volume 4, Issue 14, 2015-2016, Pages 999-1004]
-
Oleoic acid
Modification of PES Polymeric Membrane by Oleic Acid for Membrane Distillation Process [Volume 8, Issue 31, 2019-2020, Pages 2228-2238]
-
Optical absorption
Synthesis of gold Nanoparticles: Influence of reducing agent on optical properties [Volume 12, Issue 45, 2023, Pages 36-44]
-
Optical properties
Evaluation of Thermo-Optical Properties of Black Thermal Control Polyurethane Coating
and the Effect of Atomic Oxygen on the Coating [Volume 3, Issue 11, 2014-2015, Pages 763-776]
-
Optical properties
Synthesis and characterization of gold–silica core-shell nanoparticles [Volume 10, Issue 38, 2021, Pages 2838-2846]
-
Optimization of dyeing
The use of a fluorescent dye in the dyeing of wool fibers in carpet Naphthalimide [Volume 5, Issue 17, 2016-2017, Pages 1243-1250]
-
Optoelectronic properties
Effect of ZnO seed layer on the growth of CdS nanostructures for optoelectronic applications [Volume 9, Issue 35, 2020, Pages 2590-2600]
-
Organic Coatings
Anticorrosion pigments based on zinc phosphate [Volume 1, Issue 3, 2012-2013, Pages 159-176]
-
Organic-Inorganic
Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2015-2016, Pages 1119-1128]
-
Organic-inorganic hybrid
Evaluation of anticratering agent based on Epoxy-Aminopropyltriethoxy silane-diethanol
amine for cathodic electrocoating [Volume 3, Issue 11, 2014-2015, Pages 787-795]
-
Oxidation Resistance
Study of oxidation behavior of titanium carbide powders coated with alumina using simultaneous thermal analysis [Volume 2, Issue 7, 2013-2014, Pages 490-495]
-
Oxidation Resistance
Effect of NiAl- (Cr2O3, TiO2) composite coating on oxidation resistance of HH heat resistant steel [Volume 7, Issue 27, 2018-2019, Pages 1909-1915]
-
Oxygen Diffusion
Molecular dynamics simulation of the effect of size, crystallite shape, and defect on oxygen diffusion in SrTiO3 [Volume 7, Issue 26, 2018-2019, Pages 1843-1850]
-
Oxygen transmission rate
Improvement of water vapor and oxygen permeability of poly lactic acid films using a network polymer synthesized from 2-acrylamido-2-methylpropanesulfonic acid [Volume 5, Issue 18, 2016-2017, Pages 1297-1302]
-
Oxytetracycline
Synthesis and characterization of modified resorcinol formaldehyde aerogel as a novel absorbent to removing oxytetracycline from aqueuos solution [Volume 10, Issue 38, 2021, Pages 2848-2861]
P
-
PAC
Investigation of adsorption of copper, zinc and cadmium metals by polymeric coagulant polyaluminum chloride based on density functional theory [Volume 10, Issue 37, 2021, Pages 2740-2747]
-
Pbs nanoparticles
Synthesis and investigation of band energy variations in Pbs nanocrystallites via optical route [Volume 2, Issue 6, 2013-2014, Pages 403-409]
-
Pb synthesis
Synthesis and investigation of band energy variations in Pbs nanocrystallites via optical route [Volume 2, Issue 6, 2013-2014, Pages 403-409]
-
PEG Crystallization
Optimization of toughening of Polylactic Acid Nanocomposites/ Nanofibrillated Cellulose [Volume 7, Issue 25, 2018-2019, Pages 1789-1798]
-
Perovskite
Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2016-2017, Pages 1363-1370]
-
Phase Change Materials (PCMs)
Fabrication of Coaxial Electrospun Phase Change Cellulose Acetate/ Polyethylene Glycol Nanofibers toward Thermal Energy Storage [Volume 2, Issue 7, 2013-2014, Pages 455-462]
-
Phase composition
Synthesize, Characterization and Studying the Inhibitive Properties of Potassium Zinc Phosphate (PZP) Pigments [Volume 3, Issue 12, 2014-2015, Pages 849-860]
-
Phase separation
Synthesis of high entropy alloy FeCoNiCuAl and investigation of enthalpy effect in phase separation [Volume 11, Issue 44, 2023, Pages 3220-3233]
-
Phenothiazine
The synthesis of two newdyes based on indoline and the investigation of their photovotalic properties [Volume 2, Issue 6, 2013-2014, Pages 420-426]
-
Photo-catalyst
The effect of reduced graphene oxide on photo-catalytic degradation Rhodamine B [Volume 7, Issue 25, 2018-2019, Pages 1773-1780]
-
Photo catalysts
Silver photo-deposition on ZnO nanorods grown on Zn substrate and study of their optical and photocatalytic properties [Volume 10, Issue 39, 2021, Pages 2862-2870]
-
Photocatalytic
The assessment of photocatalytic properties of a synthesized TiO2/Ag nanocomposite particle loaded on polyester/cotton fabric via the discoloration of methylene blue [Volume 6, Issue 22, 2017-2018, Pages 1587-1596]
-
Photocatalytic activity
Fabrication of SiO2 and SnO2 composite nanofibers in order to increase the photocatalytic degradation under ultraviolet light. [Volume 11, Issue 41, 2023, Pages 3112-3123]
-
Photocatalytic activity
Studying the UV protection of the cotton fabric coated with MOF-derived C@ZnO and photocatalytic activity of synthesized nanoparticles [Volume 11, Issue 44, 2023, Pages 3196-3204]
-
Photocatalytic oxidation
Study on the effect of photocatalytic benzene elimination reaction on the tensile strength of water-based acrylic paint [Volume 4, Issue 15, 2015-2016, Pages 1059-1068]
-
Photocatalytic paint
Investigation of water-based binders (organic-inorganic) application on mechanical properties of photocatalytic pseudo-paints [Volume 5, Issue 20, 2016-2017, Pages 1471-1480]
-
Photochromic
Synthesis and investigation of photochoromic behavior of bicyclic aziridine based on calix pyrrole as an intelligent molecule [Volume 1, Issue 2, 2012-2013, Pages 41-48]
-
Photocurrent-photovoltage curves
The synthesis of two newdyes based on indoline and the investigation of their photovotalic properties [Volume 2, Issue 6, 2013-2014, Pages 420-426]
-
Photoelectrochemical
Synthesis and investigation of the effect of precursor on hematite morphology using chemical vapor deposition layer for photoelectrochemical applications [Volume 10, Issue 39, 2021, Pages 2924-2933]
-
Photoelectrochemical cathode protection
Preparation of tungsten-modified hematite-based photoconductors for photoelectrochemical cathodic protection of stainless steel [Volume 9, Issue 34, 2020, Pages 2482-2489]
-
Photoelectrochemical water splitting
Synthesis of Cu2O-CuO two layer as photocathode and investigation of its photoelectrochemical properties [Volume 8, Issue 32, 2019-2020, Pages 2310-2318]
-
Photoluminescence
Synthesis and Characterization of Mn-Doped ZnO quantum dots utilizable in optical biosensors [Volume 1, Issue 3, 2012-2013, Pages 213-218]
-
Photoluminescence
Synthesis of gold Nanoparticles: Influence of reducing agent on optical properties [Volume 12, Issue 45, 2023, Pages 36-44]
-
Photovoltaic Parameters
Synthesis of benzoxanthene-3,4-carboxilic anhydride and application in dye-sensitized solar cell [Volume 7, Issue 27, 2018-2019, Pages 1887-1897]
-
Phthalhydrazide
Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2021, Pages 2292-3002]
-
Pickering emulsion
Mechanism of particle formation, morphology and mechanical properties of
hybrid and pure PMMA latexes prepared via Pickering and surfactant-free
emulsion polymerization [Volume 4, Issue 15, 2015-2016, Pages 1087-1096]
-
Pickering emulsion polymerization
Synthesis of leather fatliquoring agent with using castor oil/metallic organic
frameworks (MOFs) via Pickering emulsion polymerization [Volume 6, Issue 21, 2017-2018, Pages 1543-1549]
-
Piezoelectric
Hybrid Pizo-Triboelectric Energy Nanogenerator from Woollen fabric and PVDF/BaTiO3 Nanofibrous Layer [Volume 9, Issue 34, 2020, Pages 2474-2481]
-
Plasma
Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2016-2017, Pages 1429-1437]
-
Plasma
Investigation graft polymerization of cyclodextrin derivative on the surface of cellulose by applying plasma technic [Volume 10, Issue 38, 2021, Pages 2816-2836]
-
Plasma spray coating
Plasma sprayed nano-hydroxyapatite coatings on titanium alloys [Volume 5, Issue 20, 2016-2017, Pages 1407-1413]
-
Plasmonic Effect
Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth [Volume 6, Issue 23, 2017-2018, Pages 1635-1640]
-
Plasmonic Kit
Rapid and Easy Fabrication of Tryptophan Amino Acid Plasmonic Detection Kit [Volume 9, Issue 33, 2020, Pages 2370-2378]
-
Plastisol Coating
Evaluation of Effective Parameters on Rheological and Mechanical Properties of Automotive Plastisol Coatings Reinforced with Nano Silica Using Taguchi Method [Volume 7, Issue 27, 2018-2019, Pages 1925-1936]
-
PMMA/SiO2 Nanocomposite
Synthesis of Polymethylmetacrylate Containing of Silica Nanoparticles by Suspended in-situ Polymerization Used in Coating Industry [Volume 5, Issue 17, 2016-2017, Pages 1187-1194]
-
Polar Co-Solvent
Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016-2017, Pages 1215-1222]
-
Polarization Test
Influences of Inorganic Coatings on Corrosion Resistance of Invar Alloy [Volume 4, Issue 14, 2015-2016, Pages 991-998]
-
Polar parameter
preparation and characterixation of perflourosilane treated nanosilica and investigation of effect of pH in treatment process [Volume 1, Issue 4, 2012-2013, Pages 253-264]
-
Polar parameter
Evaluation of corrosion inhibition of some Azole compounds on Austenitic stainless steel exposed to HCl [Volume 1, Issue 4, 2012-2013, Pages 265-274]
-
Pollutant separation
Isolation of Organic Contaminants (Dyes) Using Modified Surface Sodium Zeolite: Isotherm and Bleaching Kinetics [Volume 10, Issue 39, 2021, Pages 2908-2923]
-
Poly(3
Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016-2017, Pages 1215-1222]
-
Polyacrylamideoxime
Synthesis and Characterization of Polyacrylamideoxime and Its Nanofibers as Self-Decontamination Coatings [Volume 4, Issue 14, 2015-2016, Pages 1015-1022]
-
Polyacrylonitrile
Synthesis and Characterization of Polyacrylamideoxime and Its Nanofibers as Self-Decontamination Coatings [Volume 4, Issue 14, 2015-2016, Pages 1015-1022]
-
Polyacrylonitrile
Evaluation of Carbon Nano Webs produced by Needleless and Conventional Electro-spun PAN-MWCNT Nanofibers Precursor [Volume 8, Issue 31, 2019-2020, Pages 2212-2227]
-
Polyamide
Flame-Retardant Advanced Materials based on Binary and Ternary Polymer Blends: Morphology, Thermal Stability and Flame Retardancy [Volume 11, Issue 44, 2023, Pages 3144-3152]
-
Polyamide66
Preparation and Characterization of Thermally Stable Nanofiber Based on Polyamide 66/ Poly (amide-imide) Blend [Volume 7, Issue 26, 2018-2019, Pages 1871-1879]
-
Polyamide-imide (PAI)
Preparation and Characterization of Thermally Stable Nanofiber Based on Polyamide 66/ Poly (amide-imide) Blend [Volume 7, Issue 26, 2018-2019, Pages 1871-1879]
-
Polyaniline
Corrosion resistance of polyaniline coatings formed by electropolymerization on titanium grade 2 [Volume 7, Issue 27, 2018-2019, Pages 1899-1907]
-
Polyaniline
The Application of Carbon Fabric Coated with Polyaniline as a Sensitive Color Solar Cell Cathode [Volume 6, Issue 24, 2017-2018, Pages 1703-1718]
-
Polyaniline
Application of Ideal Adsorption Solution Theory (IAST) for Investigation of Separation of Carbon Dioxide / Nitrogen Gases on Nitrogen-doped Porous Carbon Synthesized from Nano-polyaniline [Volume 8, Issue 32, 2019-2020, Pages 2288-2300]
-
Poly Aniline
Design and manufacture multi nano biosensor for simultaneous detection of Carbon Dioxide, Methane, Ethanol and Ammonia gases [Volume 7, Issue 25, 2018-2019, Pages 1799-1808]
-
Polyaniline-Graphene
A novel nano multi MIP sensor for simultaneous detection of cTnT & HbA1c [Volume 8, Issue 30, 2019-2020, Pages 2200-2210]
-
Polyaniline microcapsules
Synthesis of redox- responsive polyaniline microcapsules containing 8-hydroxyquinoline for corrosion protection of coatings. [Volume 9, Issue 34, 2020, Pages 2502-2511]
-
Poly Catechol. Eectropolymerization
Synthesis of Graphene- Poly Catechol Conductive Polymer Nanocomposite Production by Electropolymerization for use in electrochemical sensors [Volume 9, Issue 33, 2020, Pages 2380-2391]
-
Polyester acrylate
Synthesis and characterization of water-reducible polyester-acrylate used in automotive paint industry [Volume 9, Issue 36, 2020, Pages 2632-2643]
-
Polyester/cellulose blended fabric
The assessment of photocatalytic properties of a synthesized TiO2/Ag nanocomposite particle loaded on polyester/cotton fabric via the discoloration of methylene blue [Volume 6, Issue 22, 2017-2018, Pages 1587-1596]
-
Polyester fibers
Production of polyester fibers with high thermal properties using Muscovite nanoparticles [Volume 11, Issue 41, 2023, Pages 3124-3133]
-
Polyester Resin
Synthesis and identification of water-reducible polyester resin curable with melamine resin and study of its anti-corrosive properties in compare with an imported commercial resin [Volume 10, Issue 37, 2021, Pages 2706-2716]
-
Polyethersulfone polymer
Modification of PES Polymeric Membrane by Oleic Acid for Membrane Distillation Process [Volume 8, Issue 31, 2019-2020, Pages 2228-2238]
-
Polyhexamethylene biguanide
PHMB and Nano Silver As Novel Agents for Producing Antibacterial RegeneratedFibers from Silk Wastage [Volume 4, Issue 15, 2015-2016, Pages 1051-1058]
-
Polylactic Acid
Improvement of water vapor and oxygen permeability of poly lactic acid films using a network polymer synthesized from 2-acrylamido-2-methylpropanesulfonic acid [Volume 5, Issue 18, 2016-2017, Pages 1297-1302]
-
Polylactic Acid
Optimization of toughening of Polylactic Acid Nanocomposites/ Nanofibrillated Cellulose [Volume 7, Issue 25, 2018-2019, Pages 1789-1798]
-
Poly-lactic glycolic acid
Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2016-2017, Pages 1429-1437]
-
Poly (melamine-formaldehyde)
Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion
Resistance Epoxy Coating [Volume 5, Issue 19, 2016-2017, Pages 1353-1361]
-
Polymer blends
Flame-Retardant Advanced Materials based on Binary and Ternary Polymer Blends: Morphology, Thermal Stability and Flame Retardancy [Volume 11, Issue 44, 2023, Pages 3144-3152]
-
Polymeric Coating
Synthesis of Polymethylmetacrylate Containing of Silica Nanoparticles by Suspended in-situ Polymerization Used in Coating Industry [Volume 5, Issue 17, 2016-2017, Pages 1187-1194]
-
Polymeric precursor method
Synthesis and evaluation of ZnFe2-xAlxO4 spinel ferrite nanopigments with high NIR reflectance [Volume 6, Issue 22, 2017-2018, Pages 1559-1568]
-
Polymeric precursor method
The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015-2016, Pages 975-982]
-
Polymer Inclusion Membrane (PIM)
Synthesis and Characterization of a Cellulose Acetate Based PIM for Water Treatment [Volume 6, Issue 22, 2017-2018, Pages 1619-1626]
-
Polymerizable dyes
A review on synthesis, properties and application of advanced naphthalimide dyes [Volume 1, Issue 2, 2012-2013, Pages 13-30]
-
Polymerization
Improvement of water vapor and oxygen permeability of poly lactic acid films using a network polymer synthesized from 2-acrylamido-2-methylpropanesulfonic acid [Volume 5, Issue 18, 2016-2017, Pages 1297-1302]
-
Polymerization
Evalution of various parameters in synthesis of PNS [Volume 7, Issue 28, 2018-2019, Pages 1990-2001]
-
Polymerization
The Application of Carbon Fabric Coated with Polyaniline as a Sensitive Color Solar Cell Cathode [Volume 6, Issue 24, 2017-2018, Pages 1703-1718]
-
Poly-naphthalene sulfonate
Evalution of various parameters in synthesis of PNS [Volume 7, Issue 28, 2018-2019, Pages 1990-2001]
-
Polyol
Extracting and investigating the accuracy of granulation and molecular weight of lignin based biological polyols for the production of polyurethane coating [Volume 11, Issue 44, 2023, Pages 3206-3218]
-
Polyproplyne/ Acrylated -butadiene Rubber Compound
Preparation and investigation of mechanical properties of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of acrylic acid modified polybutadiene compatibilizer [Volume 8, Issue 30, 2019-2020, Pages 2187-2180]
-
Polypropylene/ Butadiene Rubber Compound
Preparation and investigation of mechanical properties of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of acrylic acid modified polybutadiene compatibilizer [Volume 8, Issue 30, 2019-2020, Pages 2187-2180]
-
Polyprorpylene
Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fibers
II. Non-isothermal crystallization kinetics [Volume 8, Issue 30, 2019-2020, Pages 2152-2165]
-
Polystyrene
Synthesizing of molecularly imprinted nanocomposites for using as diazinon
sensor [Volume 6, Issue 21, 2017-2018, Pages 1507-1514]
-
Polystyrene
Smart coatings based on poly(styrene-spiropyran) photo-responsive polymers [Volume 9, Issue 33, 2020, Pages 2400-2407]
-
Polystyrene Sulfonate
Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016-2017, Pages 1215-1222]
-
Polyurethane
Effect of silicon carbide nanoparticles on the properties of polyurethane coatings applied on steel substrates [Volume 3, Issue 11, 2014-2015, Pages 743-751]
-
Polyurethane
Evaluation of Thermo-Optical Properties of Black Thermal Control Polyurethane Coating
and the Effect of Atomic Oxygen on the Coating [Volume 3, Issue 11, 2014-2015, Pages 763-776]
-
Polyurethane
Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks [Volume 6, Issue 23, 2017-2018, Pages 1627-1634]
-
Polyurethane
The Influence of nanosilver on thermal and antibacterial properties of a two component 100% solid polyurethane coating [Volume 1, Issue 4, 2012-2013, Pages 245-252]
-
Polyurethane
The effect of synthetic silica particles, urethane resin and Fluorocarbon on the water/oil repellency of cotton [Volume 7, Issue 25, 2018-2019, Pages 1815-1823]
-
Polyurethane
Optimization of nano clay content on in-situ polymerization of polyurethane/polymethyl methacrylate interpenetrating network to study acoustic, thermal and mechanical properties of nanocomposites [Volume 6, Issue 24, 2017-2018, Pages 1747-1754]
-
Polyurethane Elastomer
Mimicking mechanical properties of human tissues with 3D printable polyurethane-based elastomeric-hydrogels [Volume 11, Issue 41, 2023, Pages 3134-3142]
-
Polyurethane Foam
Study of the Sound Absorption Behavior and Cell walls Roughness of Flexible Polyurethane Foams [Volume 6, Issue 24, 2017-2018, Pages 1733-1739]
-
Polyurethane Foam
Improving sound absorption behavior of flexible polyurethane foams infused with polymer nanofibers, carbon nanotubes and nanoparticles [Volume 8, Issue 29, 2019-2020, Pages 2072-2080]
-
Poly(vinyl alcohol)
Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method [Volume 10, Issue 40, 2021, Pages 2978-2990]
-
Polyvinyl Pyrolydone
Synthesis of Polymethylmetacrylate Containing of Silica Nanoparticles by Suspended in-situ Polymerization Used in Coating Industry [Volume 5, Issue 17, 2016-2017, Pages 1187-1194]
-
Polyzincon
Fabrication of electrochemical sensor based on polyzincon nanolayer for dopamine detection [Volume 9, Issue 35, 2020, Pages 2520-2530]
-
POSS Nanoadditive
Preparation of protective coating based on POSS- nanocage for space solar cells and evaluation of its stability in thermal cycling [Volume 4, Issue 16, 2015-2016, Pages 1159-1168]
-
Post Heat-treatment
Plasma sprayed nano-hydroxyapatite coatings on titanium alloys [Volume 5, Issue 20, 2016-2017, Pages 1407-1413]
-
Potassium nitrate - Sodium
Synthesis and Synthesis Mechanism of Piezoelectric Powder Sodium Potassium Anhydride (KNN) Calcified at High and Low Temperatures [Volume 5, Issue 20, 2016-2017, Pages 1449-1469]
-
Potassium-sodium niobate
Potassium Sodium Niobate Lead-free Piezoelectric Ceramics: Difficulties inthe Processing and the Advantages of Iran: The Case of Iran and Slovenia [Volume 4, Issue 16, 2015-2016, Pages 1148-1158]
-
Potassium zinc phosphate
Synthesize, Characterization and Studying the Inhibitive Properties of Potassium Zinc Phosphate (PZP) Pigments [Volume 3, Issue 12, 2014-2015, Pages 849-860]
-
Powder Coatings
Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012-2013, Pages 61-70]
-
Powder Metallurgy
Fabrication of three-layer graded magnesium foam by means powder metallurgy and spacer method with an application in bioimplants: macro morphology, microstructure and compressive properties evaluation [Volume 11, Issue 44, 2023, Pages 3170-3181]
-
Praseodymium
Surface modification of AZ31 magnesium alloy to improve the corrosion resistance via eco-friendly conversion coatings based on praseodymium rare earth element [Volume 7, Issue 25, 2018-2019, Pages 1781-1787]
-
Praseodymium
Studying the anti-corrosive properties of a polyurethane coating on the AZ31 magnesium alloy via surface chemical modification by nano-conversion coatings based on praseodymium [Volume 6, Issue 24, 2017-2018, Pages 1719-1726]
-
Pre-heating substrate
Plasma sprayed nano-hydroxyapatite coatings on titanium alloys [Volume 5, Issue 20, 2016-2017, Pages 1407-1413]
-
Printed cotton-nylon blend fabric
The Effect of Inorganic Nanoparticles on Diffuse Reflectance Behavior of the Printed Cotton/Nylon Blend Fabric in Near Infrared and Short-Wave Infrared Spectral Ranges [Volume 8, Issue 30, 2019-2020, Pages 2188-2198]
-
Protective performance
Effect of curing time on the protective performance of ecofriendly silane sol-gel coating on mild steel [Volume 6, Issue 22, 2017-2018, Pages 1569-1576]
-
Protective performance
The effect of viscoelastic Parameters on the Protective performance of the Epoxy Coatings Using Creep-Recovery Modeling [Volume 9, Issue 35, 2020, Pages 2574-2588]
-
Protein corona composition
Evaluating the effect of albumin protein coating on corona composition of single walled carbon nanotubes [Volume 8, Issue 29, 2019-2020, Pages 2060-2071]
-
Pseulectric without lead
Synthesis and Synthesis Mechanism of Piezoelectric Powder Sodium Potassium Anhydride (KNN) Calcified at High and Low Temperatures [Volume 5, Issue 20, 2016-2017, Pages 1449-1469]
-
Pulse current
Comparison between constant current electrochemical and pulse current approach in reduction of graphene oxide on nickel-nickel oxide foam [Volume 7, Issue 28, 2018-2019, Pages 2002-2008]
-
PVCPlastisol
Viscosity stabilization of Nano-Composites of PVC Plastisol in underbody coating on (PVC/Closite-30B/ZnO) [Volume 5, Issue 19, 2016-2017, Pages 1381-1388]
-
PVDF/BaTiO3 nanofibers
Hybrid Pizo-Triboelectric Energy Nanogenerator from Woollen fabric and PVDF/BaTiO3 Nanofibrous Layer [Volume 9, Issue 34, 2020, Pages 2474-2481]
-
PVP Concentration
Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth [Volume 6, Issue 23, 2017-2018, Pages 1635-1640]
Q
-
Quantum dots
Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2015-2016, Pages 1169-1178]
-
Quantum dots
Synthesis and Characterization of Mn-Doped ZnO quantum dots utilizable in optical biosensors [Volume 1, Issue 3, 2012-2013, Pages 213-218]
R
-
Rare earth elements
Surface modification of AZ31 magnesium alloy to improve the corrosion resistance via eco-friendly conversion coatings based on praseodymium rare earth element [Volume 7, Issue 25, 2018-2019, Pages 1781-1787]
-
Rare earth elements
Studying the anti-corrosive properties of a polyurethane coating on the AZ31 magnesium alloy via surface chemical modification by nano-conversion coatings based on praseodymium [Volume 6, Issue 24, 2017-2018, Pages 1719-1726]
-
Reduced graphene Oxide
Synthesis and characterization of reduced graphene oxide with magnetized polyaniline for electromagnetic shielding [Volume 12, Issue 45, 2023, Pages 46-56]
-
Reducing Agent
Synthesis of gold Nanoparticles: Influence of reducing agent on optical properties [Volume 12, Issue 45, 2023, Pages 36-44]
-
Regenerated silk fibers
PHMB and Nano Silver As Novel Agents for Producing Antibacterial RegeneratedFibers from Silk Wastage [Volume 4, Issue 15, 2015-2016, Pages 1051-1058]
-
Reinforced Polyurethane
Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines [Volume 10, Issue 38, 2021, Pages 2780-2791]
-
Retarder: Surfactant
Application of poly(amidoamine) dendrimer as a retarding agent in acrylic dyeing with a basic dye [Volume 4, Issue 14, 2015-2016, Pages 983-990]
-
Rheological additives
Studying the effects of Rheological additives on the Rheological Properties of Offset Inks [Volume 4, Issue 14, 2015-2016, Pages 999-1004]
-
Rheological parameters
The effect of viscoelastic Parameters on the Protective performance of the Epoxy Coatings Using Creep-Recovery Modeling [Volume 9, Issue 35, 2020, Pages 2574-2588]
-
Rheological properties
Investigating the effect of carbon nanotubes containing carboxyl and hydroxyl functional groups on the rheological properties of water-based drilling fluid [Volume 11, Issue 44, 2023, Pages 3182-3195]
-
Rheology
Evaluation of rheological parameters of cordierite suspensions [Volume 6, Issue 22, 2017-2018, Pages 1577-1586]
-
Rheology
Studying the effects of Rheological additives on the Rheological Properties of Offset Inks [Volume 4, Issue 14, 2015-2016, Pages 999-1004]
-
Rheology
Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensions [Volume 7, Issue 26, 2018-2019, Pages 1851-1857]
-
Rheology
Evaluation of Effective Parameters on Rheological and Mechanical Properties of Automotive Plastisol Coatings Reinforced with Nano Silica Using Taguchi Method [Volume 7, Issue 27, 2018-2019, Pages 1925-1936]
-
Rheology
Evaluation of rheological properties and shear strength of modified plastisol by nano-silica and nano-calcium carbonate using Taguchi method [Volume 10, Issue 40, 2021, Pages 2966-2977]
-
Rhodamine B
Synthesis, Characterization and Investigation of ZnO/GO Nanocomposite Sonophotocatalytic Properties for Degradation of Rhodamine B Dye [Volume 9, Issue 35, 2020, Pages 2532-2544]
-
Road markings
To what extent glass beads are important in road markings [Volume 10, Issue 37, 2021, Pages 2748-2756]
-
Roughness
Study of the Sound Absorption Behavior and Cell walls Roughness of Flexible Polyurethane Foams [Volume 6, Issue 24, 2017-2018, Pages 1733-1739]
-
Ruthenium oxide
Preparation, Electrochemical Properties and Stability of Sol-Gel Deriveed Nano-Composite
Coating of Ni+Ru02 [Volume 3, Issue 11, 2014-2015, Pages 777-786]
-
Ruthenium oxide
Nano-Composite Coating of Ni+RuO2 by Co-Elctrodeposition
Part I : Preparation, Electrochemical Properties and Stability [Volume 1, Issue 2, 2012-2013, Pages 49-60]
-
Ruthenium oxide
Nano-Composite Coating of Ni+RuO2 by Co-Electrodeposition
Part II: Morphology, RuO2 paricle size distribution and substrate pretreatment [Volume 1, Issue 3, 2012-2013, Pages 177-184]
S
-
Salt Spray
Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012-2013, Pages 61-70]
-
Salt Spray
Synthesis and identification of water-reducible polyester resin curable with melamine resin and study of its anti-corrosive properties in compare with an imported commercial resin [Volume 10, Issue 37, 2021, Pages 2706-2716]
-
Salt Spray and Electrochemical Impedance Spectroscopy
Studying the corrosion resistance of an epoxy clay nanocoating using salt spray test and electrochemical impedance spectroscopy [Volume 1, Issue 2, 2012-2013, Pages 3-12]
-
Salt spray .test
Effects of Temperature on Corrosion Resistance of NanoZirconia-Based Conversion Coating [Volume 3, Issue 12, 2014-2015, Pages 831-840]
-
Seed layer
Effect of ZnO seed layer on the growth of CdS nanostructures for optoelectronic applications [Volume 9, Issue 35, 2020, Pages 2590-2600]
-
SEI layer
Electrochemical investigation of SEI layer in the formation process of natural graphite anode in Li-ion battery [Volume 7, Issue 26, 2018-2019, Pages 1825-1832]
-
Self-cleaning
Investigating the self-clean property of TiO2/SiO2 hybrid coatings on polyester fibers [Volume 5, Issue 18, 2016-2017, Pages 1303-1312]
-
Self Cleaning
Influence of Citric and Maleic Acid on Photo Catalytic Properties of Nano TiO2/Polysiloxane on Polyester fabric [Volume 2, Issue 7, 2013-2014, Pages 496-508]
-
Self-cleaning coatings
Self-cleaning coatings based on titanium dioxide for Architectural Heritage [Volume 6, Issue 21, 2017-2018, Pages 1525-1529]
-
Self-colored polymers
One-pot synthesis of solvent-base self-colored acrylic polymers [Volume 2, Issue 7, 2013-2014, Pages 474-479]
-
Self decontaminating coating
Preparation self decontamination paint bosom photocatalytical composition TiO2/Ag [Volume 6, Issue 23, 2017-2018, Pages 1691-1701]
-
Self-healing
Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion
Resistance Epoxy Coating [Volume 5, Issue 19, 2016-2017, Pages 1353-1361]
-
Self-healing
Study the self-healing properties of sol-gel coatings containing reversible tetra sulfide groups [Volume 8, Issue 32, 2019-2020, Pages 2302-2308]
-
Self-healing
Synthesis of redox- responsive polyaniline microcapsules containing 8-hydroxyquinoline for corrosion protection of coatings. [Volume 9, Issue 34, 2020, Pages 2502-2511]
-
Self-stratifying
Self-Stratifying Metallic Coating Formulation Based on Polyurethane using Taguchi Experimental Design Method [Volume 9, Issue 34, 2020, Pages 2490-2500]
-
SEM
Effect of Surface Nanocrystalization on the Properties of Micro Arc Oxidation Coating on Aluminum [Volume 5, Issue 18, 2016-2017, Pages 1267-1277]
-
SEM
The Influence of nanosilver on thermal and antibacterial properties of a two component 100% solid polyurethane coating [Volume 1, Issue 4, 2012-2013, Pages 245-252]
-
Sensitizer
Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2016-2017, Pages 1363-1370]
-
Sensors
A review on synthesis, properties and application of advanced naphthalimide dyes [Volume 1, Issue 2, 2012-2013, Pages 13-30]
-
Shear strength
Evaluation of rheological properties and shear strength of modified plastisol by nano-silica and nano-calcium carbonate using Taguchi method [Volume 10, Issue 40, 2021, Pages 2966-2977]
-
Short wave infrared region
The Effect of Inorganic Nanoparticles on Diffuse Reflectance Behavior of the Printed Cotton/Nylon Blend Fabric in Near Infrared and Short-Wave Infrared Spectral Ranges [Volume 8, Issue 30, 2019-2020, Pages 2188-2198]
-
Silane
Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating [Volume 3, Issue 11, 2014-2015, Pages 733-741]
-
Silane
Novel protective coatings based on silane [Volume 1, Issue 3, 2012-2013, Pages 193-204]
-
Silica
Photocatalytic degradation of CI basic red 46 from aqueous solutions using SiO2/TiO2/Zeolite tertiary composites via advanced oxidation method [Volume 2, Issue 6, 2013-2014, Pages 427-439]
-
Silica nano-particles
Evaluation of Additive and Filler Effects on Water-based Traffic Nanocomposite Coatings [Volume 2, Issue 7, 2013-2014, Pages 445-454]
-
Silica Nanoparticles
Hydrophobic coatings based on acrylic copolymers and the effect of adding nano silica [Volume 6, Issue 23, 2017-2018, Pages 1655-1668]
-
Silicon
interaction of Tetryl on the Surface of nanostructure of fullerene C24 [Volume 7, Issue 28, 2018-2019, Pages 1974-1988]
-
Silicon carbide
Effect of silicon carbide nanoparticles on the properties of polyurethane coatings applied on steel substrates [Volume 3, Issue 11, 2014-2015, Pages 743-751]
-
Silicone
Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2016-2017, Pages 1331-1346]
-
Silicone rubber
Investigation of electrical, mechanical and thermal properties of silicone nanocomposites as electrical coating insulation [Volume 10, Issue 39, 2021, Pages 2934-2951]
-
Silk
Surface modification of silk fibers by activated carbon nanotubes [Volume 7, Issue 25, 2018-2019, Pages 1763-1772]
-
Silver
Influence of the Presence of Silver Nanowires on the hardness, tribological behavior and Corrosion Properties of Aluminum Anodizing coating [Volume 8, Issue 30, 2019-2020, Pages 2140-2150]
-
Silver
Facile synthesis and investigation of Co3O4-ZnO-Ag nanocomposites as efficient photocatalysts for decomposition of direct yellow dye [Volume 8, Issue 30, 2019-2020, Pages 2166-2179]
-
Silver
The effects of Ag nanoparticles deposition on the photocatalytic activity of C3N4 for the degradation of tetracycline [Volume 9, Issue 36, 2020, Pages 2644-2654]
-
Silver nanoparticle
Rapid and Easy Fabrication of Tryptophan Amino Acid Plasmonic Detection Kit [Volume 9, Issue 33, 2020, Pages 2370-2378]
-
Silver nanoparticles
PHMB and Nano Silver As Novel Agents for Producing Antibacterial RegeneratedFibers from Silk Wastage [Volume 4, Issue 15, 2015-2016, Pages 1051-1058]
-
Simultaneous thermal analysis
Study of oxidation behavior of titanium carbide powders coated with alumina using simultaneous thermal analysis [Volume 2, Issue 7, 2013-2014, Pages 490-495]
-
Single walled carbon nanotube
Evaluating the effect of albumin protein coating on corona composition of single walled carbon nanotubes [Volume 8, Issue 29, 2019-2020, Pages 2060-2071]
-
Sintering
Microwave-assisted Sintering of BaFe0.8Cu0.1Ni0.1O3-δ Composition for Use as Solid Oxide Fuel Cell Cathode [Volume 5, Issue 19, 2016-2017, Pages 1347-1352]
-
SiO2/SnO2 and SnO2/SiO2 core-shell nanofibers
Fabrication of SiO2 and SnO2 composite nanofibers in order to increase the photocatalytic degradation under ultraviolet light. [Volume 11, Issue 41, 2023, Pages 3112-3123]
-
Slip casting
Evaluation of rheological parameters of cordierite suspensions [Volume 6, Issue 22, 2017-2018, Pages 1577-1586]
-
Smart coatings
Smart coatings based on poly(styrene-spiropyran) photo-responsive polymers [Volume 9, Issue 33, 2020, Pages 2400-2407]
-
SMAW
Combination of weld cladding and Carburization treatment to Reconstruction of Industrial Parts of DIN-25CrMo4 Steel [Volume 7, Issue 25, 2018-2019, Pages 1809-1814]
-
Sol- gel
Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2015-2016, Pages 1119-1128]
-
Sol-Gel
Improvement of Corrosion Resistance of Aluminum by Application of Alumina-Zirconia Nanocomposite Coating via Sol-Gel Method [Volume 4, Issue 16, 2015-2016, Pages 1111-1118]
-
Sol-Gel
Comparison of Magnetic, Optical and Morphological Properties of the Nanocomposite of Reduced Graphene Oxide Coated with Zinc Ferrite Synthesized by One-Step Hydrothermal and Two-Step Sol-Gel / Hydrothermal Methods [Volume 9, Issue 33, 2020, Pages 2424-2433]
-
Sol-gel coatings
Study the self-healing properties of sol-gel coatings containing reversible tetra sulfide groups [Volume 8, Issue 32, 2019-2020, Pages 2302-2308]
-
Solid electrolyte interphase
Electrochemical investigation of SEI layer in the formation process of natural graphite anode in Li-ion battery [Volume 7, Issue 26, 2018-2019, Pages 1825-1832]
-
Solid State Reaction
Microwave-assisted Sintering of BaFe0.8Cu0.1Ni0.1O3-δ Composition for Use as Solid Oxide Fuel Cell Cathode [Volume 5, Issue 19, 2016-2017, Pages 1347-1352]
-
Solvent-base acrylic polymer
One-pot synthesis of solvent-base self-colored acrylic polymers [Volume 2, Issue 7, 2013-2014, Pages 474-479]
-
Solvent-free
Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2021, Pages 2292-3002]
-
Sonophotocatalyst
Synthesis, Characterization and Investigation of ZnO/GO Nanocomposite Sonophotocatalytic Properties for Degradation of Rhodamine B Dye [Volume 9, Issue 35, 2020, Pages 2532-2544]
-
Sound Absorption Coefficient
Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks [Volume 6, Issue 23, 2017-2018, Pages 1627-1634]
-
Spacecraft
Evaluation of Thermo-Optical Properties of Black Thermal Control Polyurethane Coating
and the Effect of Atomic Oxygen on the Coating [Volume 3, Issue 11, 2014-2015, Pages 763-776]
-
Space silicon solar cells
Preparation of protective coating based on POSS- nanocage for space solar cells and evaluation of its stability in thermal cycling [Volume 4, Issue 16, 2015-2016, Pages 1159-1168]
-
Specific surface area
Synthesis of Porous Zirconium-based Metal-Organic Framework Nanostructure for Detoxification of Chemical Pollutants [Volume 9, Issue 34, 2020, Pages 2452-2460]
-
Spinal cord regeneration
Production of Conductive Nanofibrous Core–Shell Scaffolds to Regenerate Spinal Cord Injury [Volume 6, Issue 23, 2017-2018, Pages 1681-1690]
-
Spinels
A Review to the Effects of Cations Replacement on the Properties of Combined
Spinels Based on Cobalt, Zinc and Magnesium [Volume 6, Issue 21, 2017-2018, Pages 1489-1505]
-
Spiropyran
Smart coatings based on poly(styrene-spiropyran) photo-responsive polymers [Volume 9, Issue 33, 2020, Pages 2400-2407]
-
Sputtering
Preparation of Ag-doped ZnS Thin Films by RF Magnetron Sputtering [Volume 1, Issue 3, 2012-2013, Pages 205-212]
-
Sputtering
Investigation of Morphology, Electrical and Electrochemical Properties of Gold Coating on Metallic Bipolar Plates of Fuel Cells [Volume 8, Issue 32, 2019-2020, Pages 2334-2335]
-
Stabilization
Mechanism of particle formation, morphology and mechanical properties of
hybrid and pure PMMA latexes prepared via Pickering and surfactant-free
emulsion polymerization [Volume 4, Issue 15, 2015-2016, Pages 1087-1096]
-
Stainless steel
Preparation of tungsten-modified hematite-based photoconductors for photoelectrochemical cathodic protection of stainless steel [Volume 9, Issue 34, 2020, Pages 2482-2489]
-
Stainless steel
Investigation of the effect of deposition temperature of pyrolysis spray method on superhydrophobic coatings of stearic acid modified alumina nanoparticles on stainless steel [Volume 10, Issue 38, 2021, Pages 2792-2804]
-
Starch
Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method [Volume 10, Issue 40, 2021, Pages 2978-2990]
-
Steel
Effect of curing time on the protective performance of ecofriendly silane sol-gel coating on mild steel [Volume 6, Issue 22, 2017-2018, Pages 1569-1576]
-
Steel/silicon carbide composite
Formation of Composite Layer Containing Silicon Carbide particles on the A106 Steel Surface by Tungsten Inert Gas (TIG) [Volume 4, Issue 14, 2015-2016, Pages 1005-1014]
-
Stone
Hydrophobic coatings based on acrylic copolymers and the effect of adding nano silica [Volume 6, Issue 23, 2017-2018, Pages 1655-1668]
-
Strontium titanate
Molecular dynamics simulation of the effect of size, crystallite shape, and defect on oxygen diffusion in SrTiO3 [Volume 7, Issue 26, 2018-2019, Pages 1843-1850]
-
Structural modification
Theoretical Evaluation of Hydroxyapatite: The Effect of Structural Modification on Mechanical Properties [Volume 6, Issue 24, 2017-2018, Pages 1755-1761]
-
Styrene
Production of Electrophotographic Toner using in stiu Emulsion Copolymerization of Styrene-Butyl acrylate [Volume 9, Issue 36, 2020, Pages 2678-2688]
-
Substrate
Investigation of Effective parameters on the Density of Vertically-Aligned Carbon Nanotubes Synthesized by CVD Method [Volume 2, Issue 7, 2013-2014, Pages 463-473]
-
Sulfonation
Evalution of various parameters in synthesis of PNS [Volume 7, Issue 28, 2018-2019, Pages 1990-2001]
-
Superparamagnetic
Comparison of Magnetic, Optical and Morphological Properties of the Nanocomposite of Reduced Graphene Oxide Coated with Zinc Ferrite Synthesized by One-Step Hydrothermal and Two-Step Sol-Gel / Hydrothermal Methods [Volume 9, Issue 33, 2020, Pages 2424-2433]
-
Superparamagnetic
The Study of Nanostructure, Magnetic Properties and Photocatalytic Behavior of Fe3O4/Ag Nanocomposites Synthesized by Microwave Method [Volume 9, Issue 34, 2020, Pages 2462-2473]
-
Surface chemistry
Properties of MXene and its synthesis methods [Volume 12, Issue 45, 2023, Pages 1-22]
-
Surface Enhanced Raman Spectroscopy
Rapid and Easy Fabrication of Tryptophan Amino Acid Plasmonic Detection Kit [Volume 9, Issue 33, 2020, Pages 2370-2378]
-
Surface modification
Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating [Volume 3, Issue 11, 2014-2015, Pages 733-741]
-
Surface modification
Synthesis and Characterization of Mn-Doped ZnO quantum dots utilizable in optical biosensors [Volume 1, Issue 3, 2012-2013, Pages 213-218]
-
Surface pretreatment
The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013-2014, Pages 395-402]
-
Surfactant
The effects of surfactant concentration on the properties of magnetite nanoparticles used in the production of electrophotography toner via emulsion aggregation method [Volume 2, Issue 6, 2013-2014, Pages 394-387]
-
Suspension
Synthesis of Polymethylmetacrylate Containing of Silica Nanoparticles by Suspended in-situ Polymerization Used in Coating Industry [Volume 5, Issue 17, 2016-2017, Pages 1187-1194]
-
Synthesis
Potassium Sodium Niobate Lead-free Piezoelectric Ceramics: Difficulties inthe Processing and the Advantages of Iran: The Case of Iran and Slovenia [Volume 4, Issue 16, 2015-2016, Pages 1148-1158]
-
Synthesis
Evaluation of thermoplastic road marking properties containing synthesized rosin ester [Volume 1, Issue 4, 2012-2013, Pages 287-296]
-
Synthesis
Synthesis, Characterization and Investigation of Color Properties of Some New Cationic Dyes Based On Benzothiazole [Volume 1, Issue 2, 2012-2013, Pages 71-80]
-
Synthesis
Anticorrosion pigments based on zinc phosphate [Volume 1, Issue 3, 2012-2013, Pages 159-176]
-
Synthesis
Synthesis of benzoxanthene-3,4-carboxilic anhydride and application in dye-sensitized solar cell [Volume 7, Issue 27, 2018-2019, Pages 1887-1897]
-
Synthesis
Preparation of One-dimensional Reduced Titanium Dioxide; A Candidate for photocatalytic Applications [Volume 10, Issue 39, 2021, Pages 2872-2880]
-
Synthesis
Synthesis and investigation of the effect of precursor on hematite morphology using chemical vapor deposition layer for photoelectrochemical applications [Volume 10, Issue 39, 2021, Pages 2924-2933]
-
Synthesis and synthesis
Synthesis and Synthesis Mechanism of Piezoelectric Powder Sodium Potassium Anhydride (KNN) Calcified at High and Low Temperatures [Volume 5, Issue 20, 2016-2017, Pages 1449-1469]
-
Synthesize
Synthesize, Characterization and Studying the Inhibitive Properties of Potassium Zinc Phosphate (PZP) Pigments [Volume 3, Issue 12, 2014-2015, Pages 849-860]
T
-
Taguchi method
Evaluation of Effective Parameters on Rheological and Mechanical Properties of Automotive Plastisol Coatings Reinforced with Nano Silica Using Taguchi Method [Volume 7, Issue 27, 2018-2019, Pages 1925-1936]
-
Taguchi method
Evaluation of simultaneous presence of epoxy and polyester resins containing silica nanoparticles in the structure of foodstuff can coatings [Volume 10, Issue 39, 2021, Pages 2882-2897]
-
Tetryl
interaction of Tetryl on the Surface of nanostructure of fullerene C24 [Volume 7, Issue 28, 2018-2019, Pages 1974-1988]
-
Textile
Application of Cactus on Textiles as a Shielding Agent against Electromagnetic Waves [Volume 10, Issue 39, 2021, Pages 2898-2907]
-
Thermal and mechanical loadings
Failure mechanisms and their finite element modeling of air plasma spray thermal barrier coatings: A review [Volume 7, Issue 27, 2018-2019, Pages 1937-1953]
-
Thermal barrier coating
Failure mechanisms and their finite element modeling of air plasma spray thermal barrier coatings: A review [Volume 7, Issue 27, 2018-2019, Pages 1937-1953]
-
Thermal control coating
Evaluation of Thermo-Optical Properties of Black Thermal Control Polyurethane Coating
and the Effect of Atomic Oxygen on the Coating [Volume 3, Issue 11, 2014-2015, Pages 763-776]
-
Thermal control paint
Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2016-2017, Pages 1331-1346]
-
Thermal cycling
Preparation of protective coating based on POSS- nanocage for space solar cells and evaluation of its stability in thermal cycling [Volume 4, Issue 16, 2015-2016, Pages 1159-1168]
-
Thermal Gravimetric Analysis (TGA) Thermal Degradation
Thermal stability and thermal degradation of epoxy nanocomposites in the presence of full vulcanized elastomeric nanoparticles [Volume 10, Issue 37, 2021, Pages 2758-2770]
-
Thermal Property
Physical, Mechanical and Thermal Properties of Epoxy Coatings Modified with Nitrile-Butadiene Nano-rubber [Volume 7, Issue 28, 2018-2019, Pages 2036-2047]
-
Thermal stability
Effect of silicon carbide nanoparticles on the properties of polyurethane coatings applied on steel substrates [Volume 3, Issue 11, 2014-2015, Pages 743-751]
-
Thermal stability
Preparation and Characterization of Thermally Stable Nanofiber Based on Polyamide 66/ Poly (amide-imide) Blend [Volume 7, Issue 26, 2018-2019, Pages 1871-1879]
-
Thermal stability
Thermal stability and thermal degradation of epoxy nanocomposites in the presence of full vulcanized elastomeric nanoparticles [Volume 10, Issue 37, 2021, Pages 2758-2770]
-
Thermal stability
Investigation of electrical, mechanical and thermal properties of silicone nanocomposites as electrical coating insulation [Volume 10, Issue 39, 2021, Pages 2934-2951]
-
Thermal stability
Investigating the effect of carbon nanotubes containing carboxyl and hydroxyl functional groups on the rheological properties of water-based drilling fluid [Volume 11, Issue 44, 2023, Pages 3182-3195]
-
Thermal treatment
Investigation of the magnetic and structural properties of Zinc cobalt ferrite nanoparticles CoxZn1-xFe2O4 synthesized by thermal process [Volume 5, Issue 19, 2016-2017, Pages 1389-1397]
-
Thermoplastic Elastomer
Non-isothermal crystallization kinetics of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of polybutadiene modified with acrylic acid as compatibilzer [Volume 8, Issue 31, 2019-2020, Pages 2270-2278]
-
Thermoplastic elastomer vulcanizate (TPV)
Preparation and investigation of mechanical properties of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of acrylic acid modified polybutadiene compatibilizer [Volume 8, Issue 30, 2019-2020, Pages 2187-2180]
-
Thermoplastic road marking
Evaluation of thermoplastic road marking properties containing synthesized rosin ester [Volume 1, Issue 4, 2012-2013, Pages 287-296]
-
Thin film
Fabrication of Polymeric Micro-Platelets via Electro-Centrifuge Spinning [Volume 6, Issue 21, 2017-2018, Pages 1515-1524]
-
Thin film
Synthesis and Evaluation of Tungsten, Tungsten nitride and Tungsten oxide films Prepared in a Magnetron Sputtering System [Volume 1, Issue 2, 2012-2013, Pages 31-40]
-
Thin film
Growth kinetic study of amorphous carbon thin film deposited by Ion Beam Sputtering deposition (IBSD) method using Avrami's model [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Thin films
Preparation of Ag-doped ZnS Thin Films by RF Magnetron Sputtering [Volume 1, Issue 3, 2012-2013, Pages 205-212]
-
Thioglycolic Acid
Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2015-2016, Pages 1169-1178]
-
Thixotropy
Studying the effects of Rheological additives on the Rheological Properties of Offset Inks [Volume 4, Issue 14, 2015-2016, Pages 999-1004]
-
Tic powder
Study of oxidation behavior of titanium carbide powders coated with alumina using simultaneous thermal analysis [Volume 2, Issue 7, 2013-2014, Pages 490-495]
-
TiO2-Ag
Effect of Ag dopped group on the dye removal efficiency of TiO2-Ag and
ZnO-Ag nanophotocatalyst; a comparison study [Volume 4, Issue 15, 2015-2016, Pages 1071-1080]
-
TiO2/Ag
The assessment of photocatalytic properties of a synthesized TiO2/Ag nanocomposite particle loaded on polyester/cotton fabric via the discoloration of methylene blue [Volume 6, Issue 22, 2017-2018, Pages 1587-1596]
-
TiO2 Coating
Microstructural, Electrochemical and Biocompatibility Investigation of TiO2 Coating on AZ91D by magnetron sputtering method [Volume 8, Issue 31, 2019-2020, Pages 2248-2257]
-
Tissue EngineeringT Swelling
Properties and applications of hydrogels in medicine: A review [Volume 8, Issue 29, 2019-2020, Pages 2116-2128]
-
Titanium
Corrosion resistance of polyaniline coatings formed by electropolymerization on titanium grade 2 [Volume 7, Issue 27, 2018-2019, Pages 1899-1907]
-
Titanium alloy
Plasma sprayed nano-hydroxyapatite coatings on titanium alloys [Volume 5, Issue 20, 2016-2017, Pages 1407-1413]
-
Titanium dioxide
Self-cleaning coatings based on titanium dioxide for Architectural Heritage [Volume 6, Issue 21, 2017-2018, Pages 1525-1529]
-
Titanium dioxide
Photocatalytic degradation of CI basic red 46 from aqueous solutions using SiO2/TiO2/Zeolite tertiary composites via advanced oxidation method [Volume 2, Issue 6, 2013-2014, Pages 427-439]
-
Titanium dioxide
Preparation self decontamination paint bosom photocatalytical composition TiO2/Ag [Volume 6, Issue 23, 2017-2018, Pages 1691-1701]
-
Titanium dioxide nanoparticles
Using of Artemesia Absinthinum, Verbascum Thapsus, Viola Odorata, Matricaria Chamomilla and Corianderum Satirum natural dyes in making dye-sensitized solar cells [Volume 8, Issue 32, 2019-2020, Pages 2346-2356]
-
Toner
The effects of surfactant concentration on the properties of magnetite nanoparticles used in the production of electrophotography toner via emulsion aggregation method [Volume 2, Issue 6, 2013-2014, Pages 394-387]
-
Toughening
Impact strength increasing and toughening mechanism of epoxy resin [Volume 3, Issue 12, 2014-2015, Pages 873-884]
-
Toughness
Evaluation of Cerium conversion Coating Parameters on Strength and Adhesion Properties of Optimized Epoxy Adhesives containing Butadiene Elastomers and Graphene Oxide Particles [Volume 9, Issue 33, 2020, Pages 2434-2450]
-
Traffic coatings
Evaluation of Additive and Filler Effects on Water-based Traffic Nanocomposite Coatings [Volume 2, Issue 7, 2013-2014, Pages 445-454]
-
Triazole
Synthesis of diaryloxindoles using a novel protic ionic liquid based on triazole [Volume 12, Issue 45, 2023, Pages 24-34]
-
Triboelectric
Hybrid Pizo-Triboelectric Energy Nanogenerator from Woollen fabric and PVDF/BaTiO3 Nanofibrous Layer [Volume 9, Issue 34, 2020, Pages 2474-2481]
-
Trichlorotriazine
One-pot synthesis of solvent-base self-colored acrylic polymers [Volume 2, Issue 7, 2013-2014, Pages 474-479]
-
Troponin
A novel nano multi MIP sensor for simultaneous detection of cTnT & HbA1c [Volume 8, Issue 30, 2019-2020, Pages 2200-2210]
-
Tryptophan Amino Acid
Rapid and Easy Fabrication of Tryptophan Amino Acid Plasmonic Detection Kit [Volume 9, Issue 33, 2020, Pages 2370-2378]
-
Tungstate sulfuric acid
Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2021, Pages 2292-3002]
-
Tungsten
Synthesis and Evaluation of Tungsten, Tungsten nitride and Tungsten oxide films Prepared in a Magnetron Sputtering System [Volume 1, Issue 2, 2012-2013, Pages 31-40]
-
Tungsten Carbide
Comparison between the effects of microwave and conventional sintering
on the microstructure and mechanical properties of metal-base Al-WC
composites [Volume 4, Issue 15, 2015-2016, Pages 1081-1086]
-
Tungsten Carbide
Investigation of wear, hardness, microstructure properties and corrosion resistance
of coated st52 steel by WC-Ni particles produced by tungsten -gas
arc welding process [Volume 6, Issue 21, 2017-2018, Pages 1475-1488]
-
Tungsten Inert Gas (TIG) welding
Investigation of wear, hardness, microstructure properties and corrosion resistance
of coated st52 steel by WC-Ni particles produced by tungsten -gas
arc welding process [Volume 6, Issue 21, 2017-2018, Pages 1475-1488]
-
Tungsten nitride
Synthesis and Evaluation of Tungsten, Tungsten nitride and Tungsten oxide films Prepared in a Magnetron Sputtering System [Volume 1, Issue 2, 2012-2013, Pages 31-40]
-
Tungsten oxide
Synthesis and Evaluation of Tungsten, Tungsten nitride and Tungsten oxide films Prepared in a Magnetron Sputtering System [Volume 1, Issue 2, 2012-2013, Pages 31-40]
-
Tungsten trioxide
Preparation of tungsten-modified hematite-based photoconductors for photoelectrochemical cathodic protection of stainless steel [Volume 9, Issue 34, 2020, Pages 2482-2489]
-
TurkmenSahra
Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2014-2015, Pages 861-872]
-
Two layer Cu2O-CuO
Synthesis of Cu2O-CuO two layer as photocathode and investigation of its photoelectrochemical properties [Volume 8, Issue 32, 2019-2020, Pages 2310-2318]
U
-
UHMWPE
Development of a new method to evaluate chain entanglements density in low entangled UHMWPE and UHMWPE/Graphene nanocomposites [Volume 5, Issue 20, 2016-2017, Pages 1439-1447]
-
UHMWPE/Graphene nanocomposite
Development of a new method to evaluate chain entanglements density in low entangled UHMWPE and UHMWPE/Graphene nanocomposites [Volume 5, Issue 20, 2016-2017, Pages 1439-1447]
-
Ultraviolet Radiation
Fabrication and evalution of polyvinylidine fluride-barium sulfate composite coating for camouflage of target in snowy environments [Volume 3, Issue 11, 2014-2015, Pages 753-762]
-
UV protection
Studying the UV protection of the cotton fabric coated with MOF-derived C@ZnO and photocatalytic activity of synthesized nanoparticles [Volume 11, Issue 44, 2023, Pages 3196-3204]
-
UV-Vis NIR spectrophotometry
The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015-2016, Pages 975-982]
-
UV-Vis-NIR spectrophotometry
Synthesis and evaluation of ZnFe2-xAlxO4 spinel ferrite nanopigments with high NIR reflectance [Volume 6, Issue 22, 2017-2018, Pages 1559-1568]
V
-
Vanadium carbide
Investigation of mechanochemical reduction of CrO3-V2O5-Mg-C composite system [Volume 7, Issue 28, 2018-2019, Pages 1964-1973]
-
Vilsmeier reagent
Synthesis and investigation of photochoromic behavior of bicyclic aziridine based on calix pyrrole as an intelligent molecule [Volume 1, Issue 2, 2012-2013, Pages 41-48]
-
Visual Pollution
The effect of color component on readability of urban advertising [Volume 8, Issue 32, 2019-2020, Pages 2358-2368]
-
VSM
Investigation of the magnetic and structural properties of Zinc cobalt ferrite nanoparticles CoxZn1-xFe2O4 synthesized by thermal process [Volume 5, Issue 19, 2016-2017, Pages 1389-1397]
W
-
Wastewater treatment. malachite green
Investigation of photocatalytic efficiency of BiSI/BiOI/CNT composite for the Degradation of Malachite Green [Volume 9, Issue 35, 2020, Pages 2612-2621]
-
Water base
Evaluation of Additive and Filler Effects on Water-based Traffic Nanocomposite Coatings [Volume 2, Issue 7, 2013-2014, Pages 445-454]
-
Water flux
Modification of PES Polymeric Membrane by Oleic Acid for Membrane Distillation Process [Volume 8, Issue 31, 2019-2020, Pages 2228-2238]
-
Water repellency
The effect of synthetic silica particles, urethane resin and Fluorocarbon on the water/oil repellency of cotton [Volume 7, Issue 25, 2018-2019, Pages 1815-1823]
-
Water Treatment
Synthesis and Characterization of Fe-Based Metal-Organic Frameworks:
MIL53 (Fe) for Methylene Blue Degradation [Volume 9, Issue 36, 2020, Pages 2668-2676]
-
Water vapor permeability
Improvement of water vapor and oxygen permeability of poly lactic acid films using a network polymer synthesized from 2-acrylamido-2-methylpropanesulfonic acid [Volume 5, Issue 18, 2016-2017, Pages 1297-1302]
-
Wax
Self-Stratifying Metallic Coating Formulation Based on Polyurethane using Taguchi Experimental Design Method [Volume 9, Issue 34, 2020, Pages 2490-2500]
-
WC-Co
Characterization of WC-%XCo-%XCr coatings applied on stainless steel 316 by HP/HVOF and investigation the behavior of the coating in molten zinc bath [Volume 7, Issue 28, 2018-2019, Pages 2010-2020]
-
Wear
Investigation of wear, hardness, microstructure properties and corrosion resistance
of coated st52 steel by WC-Ni particles produced by tungsten -gas
arc welding process [Volume 6, Issue 21, 2017-2018, Pages 1475-1488]
-
Wear
Combination of weld cladding and Carburization treatment to Reconstruction of Industrial Parts of DIN-25CrMo4 Steel [Volume 7, Issue 25, 2018-2019, Pages 1809-1814]
-
Wear
Effect of carbon nanotubes concentration on wear resistance of nickel-boron-carbon nanotubes coatings [Volume 7, Issue 27, 2018-2019, Pages 1917-1924]
-
Wear
Influence of the Presence of Silver Nanowires on the hardness, tribological behavior and Corrosion Properties of Aluminum Anodizing coating [Volume 8, Issue 30, 2019-2020, Pages 2140-2150]
-
Wear behavior
Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW process [Volume 8, Issue 29, 2019-2020, Pages 2048-2059]
-
Wear resistance
Effect of silicon carbide nanoparticles on the properties of polyurethane coatings applied on steel substrates [Volume 3, Issue 11, 2014-2015, Pages 743-751]
-
Wettability
Investigation and separation of high performance oil/water emulsion with a novel nanocomposite membrane [Volume 10, Issue 40, 2021, Pages 3004-3017]
-
Woad
Optimization of Dye Extraction from Indigofera tinctoria & Dyeing Quality Evaluation [Volume 8, Issue 32, 2019-2020, Pages 2320-2332]
X
-
XRD
Investigation of the magnetic and structural properties of Zinc cobalt ferrite nanoparticles CoxZn1-xFe2O4 synthesized by thermal process [Volume 5, Issue 19, 2016-2017, Pages 1389-1397]
-
XRD
Synthesis and evaluation of ZnFe2-xAlxO4 spinel ferrite nanopigments with high NIR reflectance [Volume 6, Issue 22, 2017-2018, Pages 1559-1568]
Z
-
Zeolite LTA
Photocatalytic degradation of CI basic red 46 from aqueous solutions using SiO2/TiO2/Zeolite tertiary composites via advanced oxidation method [Volume 2, Issue 6, 2013-2014, Pages 427-439]
-
Zinc cobalt ferrite nanoparticle
Investigation of the magnetic and structural properties of Zinc cobalt ferrite nanoparticles CoxZn1-xFe2O4 synthesized by thermal process [Volume 5, Issue 19, 2016-2017, Pages 1389-1397]
-
Zinc oxide
Synthesis and Characterization of Mn-Doped ZnO quantum dots utilizable in optical biosensors [Volume 1, Issue 3, 2012-2013, Pages 213-218]
-
Zinc oxide
Synthesis, Characterization and Investigation of ZnO/GO Nanocomposite Sonophotocatalytic Properties for Degradation of Rhodamine B Dye [Volume 9, Issue 35, 2020, Pages 2532-2544]
-
Zinc Oxide-Cobalt Oxide
Facile synthesis and investigation of Co3O4-ZnO-Ag nanocomposites as efficient photocatalysts for decomposition of direct yellow dye [Volume 8, Issue 30, 2019-2020, Pages 2166-2179]
-
Zinc phosphate
Anticorrosion pigments based on zinc phosphate [Volume 1, Issue 3, 2012-2013, Pages 159-176]
-
Zinc powder
Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012-2013, Pages 61-70]
-
Zinc-rich epoxy
Evalution of Replacement of zinc by Micaceous iron oxide in zinc Rich Epoxy coatings and its effect on mechanical and chemical properties. [Volume 5, Issue 17, 2016-2017, Pages 1123-1238]
-
Zinc rich ethyl silicate
Influences of Inorganic Coatings on Corrosion Resistance of Invar Alloy [Volume 4, Issue 14, 2015-2016, Pages 991-998]
-
Zirconia
Improvement of Corrosion Resistance of Aluminum by Application of Alumina-Zirconia Nanocomposite Coating via Sol-Gel Method [Volume 4, Issue 16, 2015-2016, Pages 1111-1118]
-
Zirconia suspension
Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensions [Volume 7, Issue 26, 2018-2019, Pages 1851-1857]
-
Zirconium
The Role of zirconium additive in modifying Hydroxyapatite-based coating to increase the anti-corrosion performance for Mg implant applications [Volume 10, Issue 40, 2021, Pages 3018-3031]
-
ZnO
Study of photocatalytic properties of electrodeposited silver and zinc oxide thin films [Volume 10, Issue 37, 2021, Pages 2730-2738]
-
ZnO-Ag
Effect of Ag dopped group on the dye removal efficiency of TiO2-Ag and
ZnO-Ag nanophotocatalyst; a comparison study [Volume 4, Issue 15, 2015-2016, Pages 1071-1080]
-
ZnO@MOF-199
Evaluation Of Effectiveness Of The Artificial Neural Network For Modeling The Cyanide Ions Adsorption From Aqueous Solution Using Zno@MOF-199 Nanoadsorbent [Volume 9, Issue 36, 2020, Pages 2656-2666]
-
Zn-O NRS
Silver photo-deposition on ZnO nanorods grown on Zn substrate and study of their optical and photocatalytic properties [Volume 10, Issue 39, 2021, Pages 2862-2870]
Your query does not match with any item